Pramet

Screw clamp turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RC.. 1606MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 12mm, 4.76mm thick (ISO designation RC.. 1204MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 10mm, 3.97mm thick (ISO designation RC.. 10T3MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 6mm, 2.38mm thick (ISO designation RC.. 0602MO ), neutral hand side...

Screw clamp turning tool for holding a round positive insert with a diameter of 8mm, 3.18mm thick (ISO designation RC.. 0803MO ), neutral hand side...

Screw clamp turning tool for holding a round positive insert with a diameter of 10mm, 3.18mm thick (ISO designation RC.. 1003MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 6mm, 2.38mm thick (ISO designation RC.. 0602MO ), neutral hand side...

Screw clamp turning tool for holding a round positive insert with a diameter of 12mm, 4.76mm thick (ISO designation RC.. 1204MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 10mm, 3.97mm thick (ISO designation RC.. 10T3MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 10mm, 3.97mm thick (ISO designation RC.. 10T3MO ), neutral hand sid...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 3/8'', 5/32'' thick (ANSI designation DC.. ...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 3/8'', 5/32'' thick (ANSI designation DC.. ...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 3/8'', 5/32'' thick (ANSI designation DC.. ...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 1/4'', 3/32'' thick (ANSI designation DC.. ...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 1/4'', 3/32'' thick (ANSI designation DC.. ...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 6.35mm, 2.38mm thick (ISO designation DC.. ...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 9.525mm, 3.97mm thick (ISO designation DC.....

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 6.35mm, 2.38mm thick (ISO designation DC.. ...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 6.35mm, 2.38mm thick (ISO designation DC.. ...

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 9.525mm, 3.97mm thick (ISO designation DC.....

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 9.525mm, 3.97mm thick (ISO designation DC.....

Screw clamp turning tool for holding a 55° rhombus positive insert with an inscribed circle diameter of 9.525mm, 3.97mm thick (ISO designation DC.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 25.4mm, 7.94mm thick (ISO designation SN.. 2507.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 25.4mm, 7.94mm thick (ISO designation SN.. 2507.....