Measuring

For quick measurement of inside diameter of deep holes and width of slotsSatin chrome finishSupplied in storage pouch INSIZE Part Numbers:5/16 to 1...

ELECTRONIC CALIPER 0.01MM/0.0005IN RESOLUTION Non waterproofResolution: 0.0005”/0.01mmButtons: on/off, zero, inch/mmAuto power off, move the digita...

DUAL STEM MAGNETIC STAND For electronic/dial indicators and dial test indicators. Insize Part Numbers:6200-60 - 132lbf - no fine adjustment6201-60-...

PROFILE GAUGE STUB ACME 12 TPI PGSA12 Thread profile gauges/gages are used to check your threads for proper form and pitch. Seeping the profile tem...

Indicator graduation: 0.0005”Indicator range: 0.25”Supplied in fitted storage case INSIZE Part Numbers:0.24 to 0.4 - 2323-040.4 to 0.7 - 2323-07

TWO HOOKS RANGE 0-200MM/0-8IN BASE LGTH 100MM/3.9IN Resolution: 0.0005"/0.01mmButtons: on/off, zero, inch/mmAuto power off - move unit to turn onBa...

0.275-0.5" graduation: 0.0001"0.5-12" graduation: 0.0002"Ratchet stopSupplied with setting ring (4-6" optional) and extension rodSupplied in fitted...

ELECTRONIC CALIPER 0.01MM/0.0005IN RESOLUTION Non waterproofResolution: 0.0005”/0.01mmButtons: on/off, zero, inch/mmAuto power off, move the digita...

ELECTRONIC CALIPER 0.0005IN/0.01MM RESOLUTION Non waterproofResolution: 0.0005”/0.01mmButtons: on/off, zero, inch/mmAuto power offBattery CR2032Dat...

Measures the groove diameters of shafts and keywaysGraduation: 0.0001"Non-rotating spindleRatchet stopMicrometers over 1" are supplied with a setti...

Graduations: 0.0001" (up to 12"), 0.001" (over 12")Micrometers up to 12" have cast frame, over 12" have pipe frameRatchet stopCarbide tipsSupplied ...

DIGITAL GEAR TOOTH CALIPER Resolution .0005"/0.01mmCarbide tipsMeasure the tooth thickness by positioningthe tooth height (for tooth height > 0....

ISO868, ISO7819 and ASTM D 2240 standardsWith peak value indicator  INSIZE Part Numbers: Shore A - ISH-SAMShore D - ISH-SDM

For checking, identifying and specifying the roughness by symbolAccuracy: +12% – -17%Meets ISO2632 standardsRust-proofMade from pure nickelSupplied...

For measuring the pitch of screw threadsBlades individually marked with pitchMedium carbon steelSupplied in storage pouch  

Alloy SteelMeets ASME B89.1.9 standardsSupplied in fitted storage caseSupplied with manufacturer inspection certificate INSIZE Part Numbers: 36 Blo...

Indicator graduation: 0.0005”Indicator range: 0.25”Supplied with dial indicatorSupplied in fitted storage case INSIZE Part Numbers:0.7-1.5 - 2323-1...

Resolution: 0.0005”/0.01mmButtons: on/off, zero, inch/mm, preset +, preset -, holdAuto power off - move unit to turn power onCarbide-tipped scriber...

For electronic/dial indicators and dial test indicatorsQuick release adjustment arm for fast settingWith fine adjustment and dovetail groove Insize...

176 lbf Insize Part Number: 6212-80

Meets ASME B89.1.10M-2001 standardsLug backBezel locking clamp and limit pointersContact point thread: #4-48UNFSupplied in fitted storage case INSI...

Used as square, level, marking gage, scriber, center gage, protractor and 12” steel rule Center Head: to locate center of round workpieces - Accura...

48 wires to measure all 60° threads from 3 to 48 threads per inch (0.5 to 6mm) Supplied in a storage pouch with wire sizes marked on pockets

Graduation: 0.0001”Ratchet StopCarbide measuring facesSetting standards are included (except 0-1")Supplied in fitted storage case Insize Part Numbe...

ELECTRONIC OUTSIDE MICROMETER - WATERPROOF IP65 (WITH DATA OUTPUT) Resolution: 0.00005”/0.001mm (resolution of 3101-275E and 3103-300E is 0.0001"/0...

ELECTRONIC CALIPER COOLANT PROOF IP67 0.01MM/0.0005IN RESOLUTION Coolant proof, IP67 Ingress protection levelResolution: 0.0005”/0.01mmButtons: on/...