Milling

0.0625 OD x 0.2500 FL x 1.5000 OAL TIALN Square Series: 3200

Short series end mill with 2 flutes, diameter 4mm with 12mm length of cut, 50mm overall length and 0.1mm corner radii, according to DORMER standard...

0.2500 OD x 0.7500 FL x 2.5000 OAL TIALN Ball Series: 3200

0.0312 OD x 0.0938 FL x 1.5000 OAL TIALN Ball Series: 3200

0.5000 OD x 0.8750 FL x 3.0000 OAL FC18 Radius 0.0100 Series: 3000

Regular length corner radius end mill with 5 flutes, diameter 5/16" with 13/16" length of cut, 2.1/2" overall length and 0.015" corner radii, accor...

Regular length corner radius end mill with 5 flutes, diameter 1/2" with 1" length of cut, 3" overall length and 0.03" corner radii, according to DO...

Extra long series ball-nose end mill with 4 flutes, diameter 3/8" with 1.3/4" length of cut, 4" overall length and 3/16" full profile radius, accor...

Extra long series ball-nose end mill with 4 flutes, diameter 3/8" with 1.3/4" length of cut, 4" overall length and 3/16" full profile radius, accor...

Regular length ball-nose end mill with 4 flutes, diameter 1/16" with 1/4" length of cut, 1.1/2" overall length and 1/32" full profile radius, accor...

Regular length end mill with 3 flutes, diameter 1/16" with 1/4" length of cut and 1.1/2" overall length, according to DORMER standard with a 1/8" p...

Extra long series ball-nose end mill with 2 flutes, diameter 1/4" with 1.1/2" length of cut, 4" overall length and 1/8" full profile radius, accord...

Regular length end mill with 2 flutes, diameter 3mm with 12mm length of cut and 38mm overall length, according to DORMER standard with a 3mm plain ...

Regular length end mill with 2 flutes, diameter 7/32" with 5/8" length of cut and 2.1/2" overall length, according to DORMER standard with a 1/4" p...

Regular length end mill with 2 flutes, diameter 3/16" with 5/8" length of cut and 2" overall length, according to DORMER standard with a 3/16" plai...

Router with burr type end cut, diameter 1/4" with 1" length of cut, 3" overall length and 1/4" shank, solid carbide with bright finish, GRP diamond...

High feed cutter with positve/negative geometry which utilises 3 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 20mm with 20° approach an...

Regular length end mill with 2 flutes, diameter 7/8" with 1.1/2" length of cut and 4" overall length, according to ANSI standard with a 5/8" Weldon...

Plain Metal Slitting SawsHigh Speed Steel  3 1/2 DIAX1/32 WX1 INCH B SLIT SAW

Regular length corner radius end mill with 4 flutes, diameter 1/4" with 5/8" length of cut, 2.1/2" overall length and 0.015" corner radii, accordin...

Single-sided milling insert ANHX 10T3, 85° parallelogram for a maximum depth of cut of .1181", with .0787" corner radius, an indexing accuracy acco...

Double-sided milling insert BNGX 10T3, 82° parallelogram and high-feed design for a maximum depth of cut of .0394", with .0315" corner radius, an i...

Double-sided milling insert BNGX 10T3, 82° parallelogram and high-feed design for a maximum depth of cut of .0394", with .0315" corner radius, an i...

High feed cutter with double negative geometry which utilises 8 of BNGX 10T3.. inserts, cutting diameter 1.800" to maximum 2.000" with 29° approach...

Single-sided milling insert ADMX 11T3, 85° parallelogram for a maximum depth of cut of .3543", with .1181" corner radius, an indexing accuracy acco...

Single-sided milling insert ADMX 11T3, 85° parallelogram for a maximum depth of cut of .3543", with .0157" corner radius, an indexing accuracy acco...

Double-sided milling insert SNMX 1705, square for a maximum depth of cut of 7mm, with 0.8mm corner radius, an indexing accuracy according to ISO-to...