Pramet

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB.....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB.....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB.....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB.....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB.....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB.....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB.....

Screw clamp turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RC.. 1606MO ), left hand side c...

Screw clamp turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RC.. 1606MO ), right hand side ...

Screw clamp turning tool for holding a round positive insert with a diameter of 10mm, 3.97mm thick (ISO designation RC.. 10T3MO ), left hand side c...

Screw clamp turning tool for holding a round positive insert with a diameter of 10mm, 3.97mm thick (ISO designation RC.. 10T3MO ), right hand side ...

Screw clamp turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RC.. 1606MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 12mm, 4.76mm thick (ISO designation RC.. 1204MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 10mm, 3.97mm thick (ISO designation RC.. 10T3MO ), neutral hand sid...

Screw clamp turning tool for holding a round positive insert with a diameter of 8mm, 3.18mm thick (ISO designation RC.. 0803MO ), right hand side a...

Screw clamp turning tool for holding a round positive insert with a diameter of 8mm, 3.18mm thick (ISO designation RC.. 0803MO ), left hand side an...

Lever lock turning tool for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.. 08...

Lever lock turning tool for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.. 08...

Lever lock turning tool for holding a triangular negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation TN.. 22...

Lever lock turning tool for holding a triangular negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation TN.. 22...

Lever lock turning tool for holding a triangular negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation TN.. 22...

Lever lock turning tool for holding a triangular negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation TN.. 22...

Lever lock turning tool for holding a triangular negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation TN.. 22...

Lever lock turning tool for holding a triangular negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation TN.. 22...