Carbide and HSS End Mills

Regular length corner radius end mill with 5 flutes, diameter 5/16" with 13/16" length of cut, 2.1/2" overall length and 0.015" corner radii, accor...

Regular length end mill with 2 flutes, diameter 3mm with 12mm length of cut and 38mm overall length, according to DORMER standard with a 3mm plain ...

Regular length end mill with 2 flutes, diameter 7/32" with 5/8" length of cut and 2.1/2" overall length, according to DORMER standard with a 1/4" p...

Regular length end mill with 2 flutes, diameter 3/16" with 5/8" length of cut and 2" overall length, according to DORMER standard with a 3/16" plai...

Regular length end mill with 2 flutes, diameter 7/8" with 1.1/2" length of cut and 4" overall length, according to ANSI standard with a 5/8" Weldon...

Regular length corner radius end mill with 4 flutes, diameter 1/4" with 5/8" length of cut, 2.1/2" overall length and 0.015" corner radii, accordin...

0.2500 OD x 0.7500 FL x 2.5000 OAL TIALN Ball Series: 3200

0.5000 OD x 0.8750 FL x 3.0000 OAL FC18 Radius 0.0100 Series: 3000

Long series Trochoidal end mill with FS chip-divider and 5 flutes, diameter 20mm with 67mm length of cut, 125mm overall length, 75mm reach with nec...

Long series Trochoidal end mill with FS chip-divider and 5 flutes, diameter 16mm with 60mm length of cut, 125mm overall length, 68mm reach with nec...

Long series Trochoidal end mill with FS chip-divider and 5 flutes, diameter 12mm with 42mm length of cut, 100mm overall length, 54mm reach with nec...

Long series Trochoidal end mill with FS chip-divider and 5 flutes, diameter 10mm with 42mm length of cut, 100mm overall length, 52mm reach with nec...

Short series Trochoidal end mill with FS chip-divider and 5 flutes, diameter 20mm with 48mm length of cut, 104mm overall length, 54mm reach with ne...

Short series Trochoidal end mill with FS chip-divider and 5 flutes, diameter 16mm with 39mm length of cut, 92mm overall length, 44mm reach with nec...

Short series Trochoidal end mill with FS chip-divider and 5 flutes, diameter 10mm with 25mm length of cut, 72mm overall length, 30mm reach with nec...

Short series Trochoidal end mill with FS chip-divider and 5 flutes, diameter 12mm with 30mm length of cut, 83mm overall length, 38mm reach with nec...

Long series Trochoidal end mill with 5 flutes, diameter 20mm with 65mm length of cut, 125mm overall length and 0.3mm corner radii, according to DOR...

Long series Trochoidal end mill with 5 flutes, diameter 16mm with 55mm length of cut, 125mm overall length and 0.3mm corner radii, according to DOR...

Long series Trochoidal end mill with 5 flutes, diameter 10mm with 38mm length of cut, 100mm overall length and 0.2mm corner radii, according to DOR...

Long series Trochoidal end mill with 5 flutes, diameter 12mm with 45mm length of cut, 100mm overall length and 0.3mm corner radii, according to DOR...

Short series Trochoidal end mill with 5 flutes, diameter 20mm with 38mm length of cut, 104mm overall length and 0.3mm corner radii, according to DO...

Short series Trochoidal end mill with 5 flutes, diameter 16mm with 32mm length of cut, 92mm overall length and 0.3mm corner radii, according to DOR...

Short series Trochoidal end mill with 5 flutes, diameter 12mm with 26mm length of cut, 83mm overall length and 0.3mm corner radii, according to DOR...

Short series Trochoidal end mill with 5 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 0.2mm corner radii, according to DOR...

Regular length End mill with 4 flutes, diameter 20mm with 38mm length of cut, 104mm overall length, 50mm reach with neck relief and 0.2mm corner ra...

Regular length End mill with 4 flutes, diameter 18mm with 32mm length of cut, 92mm overall length, 42mm reach with neck relief and 0.2mm corner rad...

Regular length End mill with 4 flutes, diameter 16mm with 32mm length of cut, 92mm overall length, 42mm reach with neck relief and 0.2mm corner rad...

Regular length End mill with 4 flutes, diameter 14mm with 26mm length of cut, 83mm overall length, 37mm reach with neck relief and 0.2mm corner rad...

Regular length End mill with 4 flutes, diameter 12mm with 26mm length of cut, 83mm overall length, 37mm reach with neck relief and 0.2mm corner rad...

Regular length End mill with 4 flutes, diameter 10mm with 27mm length of cut, 70mm overall length, 32mm reach with neck relief and 0.2mm corner rad...

Regular length End mill with 4 flutes, diameter 8mm with 20mm length of cut, 64mm overall length, 26mm reach with neck relief and 0.2mm corner radi...

Regular length End mill with 4 flutes, diameter 6mm with 20mm length of cut, 60mm overall length, 25mm reach with neck relief and 0.1mm corner radi...

Regular length End mill with 4 flutes, diameter 5mm with 13mm length of cut, 57mm overall length, 20mm reach with neck relief and 0.1mm corner radi...

Regular length End mill with 4 flutes, diameter 4mm with 11mm length of cut, 57mm overall length, 20mm reach with neck relief and 0.1mm corner radi...

Regular length End mill with 4 flutes, diameter 3mm with 9mm length of cut, 50mm overall length, 15mm reach with neck relief and 0.1mm corner radii...

Long series End mill with 4 flutes, diameter 20mm with 65mm length of cut, 125mm overall length, 75mm reach with neck relief and 0.3mm corner radii...

Long series End mill with 4 flutes, diameter 16mm with 65mm length of cut, 125mm overall length, 75mm reach with neck relief and 0.3mm corner radii...

Long series End mill with 4 flutes, diameter 12mm with 45mm length of cut, 100mm overall length, 55mm reach with neck relief and 0.3mm corner radii...

Long series End mill with 4 flutes, diameter 10mm with 40mm length of cut, 100mm overall length, 50mm reach with neck relief and 0.2mm corner radii...

Long series End mill with 4 flutes, diameter 8mm with 30mm length of cut, 75mm overall length, 38mm reach with neck relief and 0.2mm corner radii, ...

Long series End mill with 4 flutes, diameter 6mm with 25mm length of cut, 75mm overall length, 32mm reach with neck relief and 0.1mm corner radii, ...

Long series End mill with 4 flutes, diameter 5mm with 19mm length of cut, 75mm overall length, 32mm reach with neck relief and 0.1mm corner radii, ...

Long series End mill with 4 flutes, diameter 4mm with 19mm length of cut, 75mm overall length, 32mm reach with neck relief and 0.1mm corner radii, ...

Regular length Barrel shape end mill with 4 flutes, diameter 16mm with 31mm length of cut, 90mm overall length, 3mm full profile radius and 75mm ta...

Regular length Barrel shape end mill with 4 flutes, diameter 12mm with 28mm length of cut, 83mm overall length, 2mm full profile radius and 80mm ta...

Regular length Barrel shape end mill with 4 flutes, diameter 10mm with 26mm length of cut, 75mm overall length, 2mm full profile radius and 85mm ta...

Regular length Barrel shape end mill with 3 flutes, diameter 8mm with 25mm length of cut, 75mm overall length, 1mm full profile radius and 90mm tan...

Regular length Barrel shape end mill with 3 flutes, diameter 6mm with 22mm length of cut, 67mm overall length, 1mm full profile radius and 95mm tan...