Dormer Pramet

Copy end mill with double negative geometry which utilises 2 off ZP 20.. single-sided inserts, cutting diameter 20mm with MT 3 morse taper shank ac...

Face mill with positve/negative geometry which utilises 2 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 20 to maximum 2...

Shank height 20 mm, shank width 10 mm, and overall length 200 mm.

Shank height 20 mm, shank width 12 mm, and overall length 200 mm.

Shank height 20 mm, shank width 15 mm, and overall length 200 mm.

Shank diameter 20 mm.

Shank height 20 mm, shank width 20 mm, and overall length 200 mm.

Shank height 20 mm, shank width 20 mm, and overall length 200 mm.

Shank height 20 mm, shank width 3 mm, and overall length 200 mm.

Shank height 20 mm, shank width 4 mm, and overall length 200 mm.

Shank height 20 mm, shank width 5 mm, and overall length 200 mm.

Shank height 20 mm, shank width 6 mm, and overall length 200 mm.

Shank height 20 mm, shank width 8 mm, and overall length 200 mm.

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 22mm with 90° a...

Shoulder face mill with double negative geometry which utilises 3 off TNGX 1004.. double-sided inserts, cutting diameter 22mm with 90° approach ang...

Copy face mill with double negative geometry which utilises 2 of RD.. 12T3MOT or RDHT 12T3MO-FA single-sided inserts, cutting diameter to maximum 2...

Disc mill with double positive geometry which utilises 6 off SNHQ 1102.. double-sided inserts, cutting diameter 2.500'' with 90° approach angle and...

Face mill with double positive geometry which utilises 4 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 2...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90...

Shoulder mill with double negative geometry which utilises 4 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 2.500'' with 90°...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 2.500" with 90° approach an...

High feed cutter with positve/negative geometry which utilises 5 off PD.X 09, PDKT 09 or PDMW 09 single-sided inserts, cutting diameter 2.500'' wit...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.209 t...

Face mill with double negative geometry which utilises 5 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 2.500"...

Face mill with positve/negative geometry which utilises 5 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 2.500" ...

Face mill with positve/negative geometry which utilises 5 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 2.500 to maximu...

Face mill with double negative geometry which utilises 6 off HNGX 0604AN.. or XNGX 0604AN.. double-sided inserts, cutting diameter 2.500 to maximum...

Face mill with double negative geometry which utilises 6 off HNGX 0906AN.. or XNGX 0906AN.. double-sided inserts, cutting diameter 2.500 to maximum...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.209 t...

Face mill with double positive geometry which utilises 6 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 2...

Face mill with double negative geometry which utilises 6 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 2.500"...

Face mill with positve/negative geometry which utilises 6 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 2.500 to maximu...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 2.500'' with 90...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90...

Shoulder mill with double negative geometry which utilises 6 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 2.500'' with 90°...