ISO Turning Tools - External

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation SN.. 1204.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation SN.. 1204.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation SN.. 1204.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation SN.. 1204.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation SN.. 1906....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO designation SN.. 2509.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO designation SN.. 2509.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO designation SN.. 2509.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO designation SN.. 2509.....

Lever lock turning tool for holding a square negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation SN.. 1906....

Lever lock turning tool for holding a round negative insert with a diameter of 19.05mm, 6.35mm thick (ISO designation RN.. 190600 ), right hand sid...

Lever lock turning tool for holding a round negative insert with a diameter of 19.05mm, 6.35mm thick (ISO designation RN.. 190600 ), left hand side...

Lever lock turning tool for holding a round negative insert with a diameter of 15.875mm, 6.35mm thick (ISO designation RN.. 150600 ), right hand si...

Lever lock turning tool for holding a round negative insert with a diameter of 15.875mm, 6.35mm thick (ISO designation RN.. 150600 ), left hand sid...

Lever lock turning tool for holding a round negative insert with a diameter of 12.7mm, 4.76mm thick (ISO designation RN.. 120400 ), left hand side ...

Lever lock turning tool for holding a round negative insert with a diameter of 12.7mm, 4.76mm thick (ISO designation RN.. 120400 ), right hand side...

Lever lock turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RCMX 1606MO ), right hand side c...

Lever lock turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RCMX 1606MO ), left hand side cu...

Lever lock turning tool for holding a round positive insert with a diameter of 25mm, 7.94mm thick (ISO designation RCMX 2507MO ), right hand side c...

Lever lock turning tool for holding a round positive insert with a diameter of 25mm, 7.94mm thick (ISO designation RCMX 2507MO ), left hand side cu...

Lever lock turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RCMX 1606MO ), right hand side c...

Lever lock turning tool for holding a round positive insert with a diameter of 20mm, 6.35mm thick (ISO designation RCMX 2006MO ), left hand side cu...

Lever lock turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RCMX 1606MO ), left hand side cu...

Lever lock turning tool for holding a round positive insert with a diameter of 20mm, 6.35mm thick (ISO designation RCMX 2006MO ), right hand side c...

Lever lock turning tool for holding a round positive insert with a diameter of 32mm, 9.52mm thick (ISO designation RCMX 3209MO ), neutral hand side...

Lever lock turning tool for holding a round positive insert with a diameter of 25mm, 7.94mm thick (ISO designation RCMX 2507MO ), neutral hand side...

Lever lock turning tool for holding a round positive insert with a diameter of 20mm, 6.35mm thick (ISO designation RCMX 2006MO ), neutral hand side...

Lever lock turning tool for holding a round positive insert with a diameter of 16mm, 6.35mm thick (ISO designation RCMX 1606MO ), neutral hand side...

Lever lock turning tool for holding a round positive insert with a diameter of 20mm, 6.35mm thick (ISO designation RCMX 2006MO ), neutral hand side...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 50.8mm (ISO designation LNMX 50.... ), right hand 75° ...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 50.8mm (ISO designation LNUX 50.... ), right hand 75° ...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 50.8mm (ISO designation LNUX 50.... ), left hand 75° s...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 40mm (ISO designation LNUX 40.... ), left hand 75° sid...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 40mm (ISO designation LNUX 40.... ), right hand 75° si...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation DN.. ...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation DN.. ...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation DN.. ...

Lever lock turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation DN.. ...