SAD16 - Bodies

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.000'' with 90...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.000'' with 90...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.250'' with 90...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.250'' with 90...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.250'' with 90...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.500'' with 90...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.500'' with 90...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.500'' with 90...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 1.500'' with 90...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.000'' with 90...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.000'' with 90...

Shoulder mill which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.000'' with 90° approach angle and CAT 50 tap...

Shoulder mill which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.000'' with 90° approach angle and CAT 50 tap...

Shoulder mill which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.000'' with 90° approach angle and .750'' con...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90...

Shoulder mill which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90° approach angle and CAT 50 tap...

Shoulder mill which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90° approach angle and CAT 50 tap...

Shoulder mill which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90° approach angle and .750'' con...

Shoulder mill which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90° approach angle and .750'' con...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 3.000'' with 90...

Shoulder mill with positve/negative geometry which utilises 7 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 3.000'' with 90...

Shoulder mill which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 3.000'' with 90° approach angle and CAT 50 tap...

Shoulder mill which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 3.000'' with 90° approach angle and 1.000'' co...

Shoulder mill which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 3.000'' with 90° approach angle and 1.000'' co...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 4.000'' with 90...

Shoulder mill with positve/negative geometry which utilises 8 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 4.000'' with 90...

Shoulder mill which utilises 5 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 4.000'' with 90° approach angle and 1.500'' co...

Shoulder mill with positve/negative geometry which utilises 9 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 5.000'' with 90...

Shoulder mill with positve/negative geometry which utilises 10 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 6.000'' with 9...