Products

Disc mill with positve/negative geometry which utilises 16 off SNHQ 1207.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 16 off SNHQ 1203.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 16 off SNHQ 1204.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Copy face mill with double negative geometry which utilises 2 of WNHX0403.. double-sided inserts, cutting diameter 16mm with 90° approach angle and...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 16mm with 90° a...

Copy face mill with double negative geometry which utilises 2 of WNHX0403.. double-sided inserts, cutting diameter 16mm with 90° approach angle and...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with double positive geometry which utilises 2 off APKT 1003.. single-sided inserts, cutting diameter 16mm with 90° approach angle an...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 16mm with 90° a...

Copy face mill with double negative geometry which utilises 3 off CNHX 0502.. double-sided inserts, cutting diameter 16mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 3 off CNHX 0502.. double-sided inserts, cutting diameter 16mm with 93° approach angle a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 16mm with 90° a...

High feed cutter with positve/negative geometry which utilises 2 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 16mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 2 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 16mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 2 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 16mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 2 off ZDCW 0703.. single-sided inserts, cutting diameter 16mm with 16,0mm parallel s...

High feed cutter with positve/negative geometry which utilises 2 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 16mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 2 off ZDCW 0703.. single-sided inserts, cutting diameter 16mm with 16,0mm parallel s...

Copy end mill which utilises 1 off LC 16-KP or LC 16-KPF single-sided insert, cutting diameter 16mm with 16mm parallel shank according to DIN 1835A...

Copy end mill which utilises 1 off RC 16 or RC 16-F single-sided insert, cutting diameter 16mm with 16mm parallel shank according to DIN 1835A, 35m...

Copy end mill which utilises 1 off RC 16 or RC 16-F single-sided insert, cutting diameter 16mm with 20mm parallel shank according to DIN 1835A, 31....

Copy end mill which utilises 1 off RC 16 or RC 16-F single-sided insert, cutting diameter 16mm with M8 threaded shank for standard modular tool-hol...

Copy end mill with double negative geometry which utilises 3 off XP 16.. single-sided inserts, cutting diameter 16mm with M10 threaded shank for st...

Copy end mill with double negative geometry which utilises 3 off XP 16.. single-sided inserts, cutting diameter 16mm with 20mm Weldon shank accordi...

Copy end mill with double negative geometry which utilises 2 off ZP 16.. single-sided inserts, cutting diameter 16mm with M8 threaded shank for sta...

Copy end mill with double negative geometry which utilises 2 off ZP 16.. single-sided inserts, cutting diameter 16mm with 16mm parallel shank accor...

Copy end mill with double negative geometry which utilises 2 off ZP 16.. single-sided inserts, cutting diameter 16mm with 20mm Weldon shank accordi...

Copy end mill with double negative geometry which utilises 2 off ZP 16.. single-sided inserts, cutting diameter 16mm with 20mm parallel shank accor...

Copy end mill with double negative geometry which utilises 2 off ZP 16.. single-sided inserts, cutting diameter 16mm with 20mm Weldon shank accordi...

Copy end mill with double negative geometry which utilises 2 off ZP 16.. single-sided inserts, cutting diameter 16mm with MT 2 morse taper shank ac...

Copy end mill with double negative geometry which utilises 2 off ZP 16.. single-sided inserts, cutting diameter 16mm with MT 2 morse taper shank ac...

Chamfer mill with double negative geometry which utilises 2 off SDEW 0903.. or SDEX 0903.. single-sided inserts, cutting diameter 16 to maximum 28m...

Chamfer mill with double negative geometry which utilises 2 off SDEW 0903.. or SDEX 0903.. single-sided inserts, cutting diameter 16 to maximum 28m...

Chamfer mill with double negative geometry which utilises 2 off SOMT 09T3.. single-sided inserts, cutting diameter 16 to maximum 28.8mm with 45° ap...

Chamfer mill with double negative geometry which utilises 2 off SDEW 0903.. or SDEX 0903.. single-sided inserts, cutting diameter 16 to maximum 28m...

Shank height 16 mm, shank width 10 mm, and overall length 200 mm.

Shank height 16 mm, shank width 12 mm, and overall length 200 mm.

Shank height 16 mm, shank width 16 mm, and overall length 200 mm.

Shank height 16 mm, shank width 16 mm, and overall length 200 mm.

Shank diameter 16 mm.

Shank height 16 mm, shank width 8 mm, and overall length 200 mm.

17/32" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...