Products

Lever lock boring bar for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.. 0804...

Step drill with 90° included step angle, straight shank and a drilling-pilot diameter of 11.00mm with a length of 23.00mm, a large diameter of 21.5...

Step drill with 90° included step angle, straight shank and a drilling-pilot diameter of 3.40mm with a length of 9.00mm, a large diameter of 6.60mm...

Step drill with 90° included step angle, straight shank and a drilling-pilot diameter of 4.50mm with a length of 11.00mm, a large diameter of 9.00m...

Step drill with 90° included step angle, straight shank and a drilling-pilot diameter of 5.50mm with a length of 13.00mm, a large diameter of 11.00...

Step drill with 90° included step angle, straight shank and a drilling-pilot diameter of 6.60mm with a length of 15.00mm, a large diameter of 13.00...

Step drill with 90° included step angle, straight shank and a drilling-pilot diameter of 9.00mm with a length of 19.00mm, a large diameter of 17.20...

Step drill with 180° included step angle, straight shank and a drilling-pilot diameter of 11.00mm with a length of 23.00mm, a large diameter of 18....

Step drill with 180° included step angle, straight shank and a drilling-pilot diameter of 3.40mm with a length of 9.00mm, a large diameter of 6.00m...

Step drill with 180° included step angle, straight shank and a drilling-pilot diameter of 4.50mm with a length of 11.00mm, a large diameter of 8.00...

Step drill with 180° included step angle, straight shank and a drilling-pilot diameter of 5.50mm with a length of 13.00mm, a large diameter of 10.0...

Step drill with 180° included step angle, straight shank and a drilling-pilot diameter of 6.60mm with a length of 15.00mm, a large diameter of 11.0...

Step drill with 180° included step angle, straight shank and a drilling-pilot diameter of 9.00mm with a length of 19.00mm, a large diameter of 15.0...

Double clamp boring bar for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Double clamp boring bar for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.. 1...

Double clamp boring bar for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.. 08...

Double clamp boring bar for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.. 08...

Lever lock boring bar for holding a 80° rhombus negative insert with an inscribed circle diameter of 15.575mm, 6.35mm thick (ISO designation CN.. 1...

Lever lock boring bar for holding a 80° rhombus negative insert with an inscribed circle diameter of 15.575mm, 6.35mm thick (ISO designation CN.. 1...

Lever lock boring bar for holding a 80° rhombus negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation CN.. 19...

Lever lock boring bar for holding a 55° rhombus negative insert with an inscribed circle diameter of 15.875mm, 6.35mm thick (ISO designation DN.. 1...

Lever lock boring bar for holding a square negative insert with an inscribed circle diameter of 15.875mm, 6.35mm thick (ISO designation SN.. 1506.....

Lever lock boring bar for holding a square negative insert with an inscribed circle diameter of 15.875mm, 6.35mm thick (ISO designation SN.. 1506.....

Lever lock boring bar for holding a square negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation SN.. 1906.. ...

Lever lock boring bar for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.. 0804...

Lever lock boring bar for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.. 0804...

Jobber length ADX drill with straight shank, diameter 0.5000" (1/2) with an overall length of 151mm and flute length of 101mm according to DIN 338 ...

Jobber length ADX drill with straight shank, diameter 0.2500" (1/4) with an overall length of 101mm and flute length of 63mm according to DIN 338 s...

Jobber length ADX drill with straight shank, diameter 0.1250" (1/8) with an overall length of 65mm and flute length of 36mm according to DIN 338 st...

Jobber length ADX drill with straight shank, diameter 10mm with an overall length of 133mm and flute length of 87mm according to DIN 338 standard w...

Jobber length ADX drill with straight shank, diameter 10.1mm with an overall length of 133mm and flute length of 87mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 10.2mm with an overall length of 133mm and flute length of 87mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 10.3mm with an overall length of 133mm and flute length of 87mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 10.4mm with an overall length of 133mm and flute length of 87mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 10.5mm with an overall length of 133mm and flute length of 87mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 10.8mm with an overall length of 142mm and flute length of 94mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 11mm with an overall length of 142mm and flute length of 94mm according to DIN 338 standard w...

Jobber length ADX drill with straight shank, diameter 11.1mm with an overall length of 142mm and flute length of 94mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 11.5mm with an overall length of 142mm and flute length of 94mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 11.7mm with an overall length of 142mm and flute length of 94mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 11.8mm with an overall length of 142mm and flute length of 94mm according to DIN 338 standard...

Jobber length ADX drill with straight shank, diameter 0.3438" (11/32) with an overall length of 125mm and flute length of 81mm according to DIN 338...

Jobber length ADX drill with straight shank, diameter 12mm with an overall length of 151mm and flute length of 101mm according to DIN 338 standard ...

Jobber length ADX drill with straight shank, diameter 12.3mm with an overall length of 151mm and flute length of 101mm according to DIN 338 standar...

Jobber length ADX drill with straight shank, diameter 12.5mm with an overall length of 151mm and flute length of 101mm according to DIN 338 standar...

Jobber length ADX drill with straight shank, diameter 13mm with an overall length of 151mm and flute length of 101mm according to DIN 338 standard ...

Jobber length ADX drill with straight shank, diameter 0.4063" (13/32) with an overall length of 133mm and flute length of 87mm according to DIN 338...

Jobber length ADX drill with straight shank, diameter 0.2031" (13/64) with an overall length of 86mm and flute length of 52mm according to DIN 338 ...