Products

Jobber length drill with taper shank, diameter 0.6875" (11/16) with an overall length of 10" and flute length of 5.3/8" according to ANSI standard ...

Jobber length drill with taper shank, diameter 0.8125" (13/16) with an overall length of 10.3/4" and flute length of 6.1/8" according to ANSI stand...

Jobber length drill with taper shank, diameter 0.4063" (13/32) with an overall length of 7.1/2" and flute length of 3.5/8" according to ANSI standa...

Jobber length drill with taper shank, diameter 0.9375" (15/16) with an overall length of 10.3/4" and flute length of 6.1/8" according to ANSI stand...

Jobber length drill with taper shank, diameter 0.4688" (15/32) with an overall length of 8" and flute length of 4.1/8" according to ANSI standard w...

Jobber length drill with taper shank, diameter 0.5313" (17/32) with an overall length of 8.1/2" and flute length of 4.5/8" according to ANSI standa...

Jobber length drill with taper shank, diameter 0.6563" (21/32) with an overall length of 9.3/4" and flute length of 5.1/8" according to ANSI standa...

Jobber length drill with taper shank, diameter 0.7188" (23/32) with an overall length of 10.1/4" and flute length of 5.5/8" according to ANSI stand...

Jobber length drill with taper shank, diameter 0.7813" (25/32) with an overall length of 10.5/8" and flute length of 6" according to ANSI standard ...

Jobber length drill with taper shank, diameter 0.4219" (27/64) with an overall length of 7.3/4" and flute length of 3.7/8" according to ANSI standa...

Jobber length drill with taper shank, diameter 0.4531" (29/64) with an overall length of 8" and flute length of 4.1/8" according to ANSI standard w...

Jobber length drill with taper shank, diameter 0.7500" (3/4) with an overall length of 10.1/2" and flute length of 5.7/8" according to ANSI standar...

Jobber length drill with taper shank, diameter 0.3750" (3/8) with an overall length of 7.3/8" and flute length of 3.1/2" according to ANSI standard...

Jobber length drill with taper shank, diameter 0.4844" (31/64) with an overall length of 8.1/4" and flute length of 4.3/8" according to ANSI standa...

Jobber length drill with taper shank, diameter 0.5156" (33/64) with an overall length of 8.1/2" and flute length of 4.5/8" according to ANSI standa...

Jobber length drill with taper shank, diameter 0.5469" (35/64) with an overall length of 8.3/4" and flute length of 4.7/8" according to ANSI standa...

Jobber length drill with taper shank, diameter 0.6406" (41/64) with an overall length of 9" and flute length of 5.1/8" according to ANSI standard w...

Jobber length drill with taper shank, diameter 0.7656" (49/64) with an overall length of 10.5/8" and flute length of 6" according to ANSI standard ...

Jobber length drill with taper shank, diameter 0.3125" (5/16) with an overall length of 6.3/8" and flute length of 3.1/8" according to ANSI standar...

Jobber length drill with taper shank, diameter 0.6250" (5/8) with an overall length of 8.3/4" and flute length of 4.7/8" according to ANSI standard...

Jobber length drill with taper shank, diameter 0.4375" (7/16) with an overall length of 7.3/4" and flute length of 3.7/8" according to ANSI standar...

Jobber length drill with taper shank, diameter 0.8750" (7/8) with an overall length of 10.3/4" and flute length of 6.1/8" according to ANSI standar...

Jobber length drill with taper shank, diameter 0.5625" (9/16) with an overall length of 8.3/4" and flute length of 4.7/8" according to ANSI standar...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder face mill with double negative geometry which utilises 2 off TNGX 1004.. double-sided inserts, cutting diameter 20mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder face mill with double negative geometry which utilises 2 off TNGX 1004.. double-sided inserts, cutting diameter 20mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off SOMT 09T3.. single-sided inserts, cutting diameter 20mm with 90° approach angle a...

Shoulder face mill with double negative geometry which utilises 2 off TNGX 1004.. double-sided inserts, cutting diameter 20mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Copy face mill with double negative geometry which utilises 3 off WNHX 0403.. double-sided inserts, cutting diameter 20mm with 93° approach angle a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder face mill with double negative geometry which utilises 3 off TNGX 1004.. double-sided inserts, cutting diameter 20mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder face mill with double negative geometry which utilises 3 off TNGX 1004.. double-sided inserts, cutting diameter 20mm with 90° approach ang...

Copy face mill with double negative geometry which utilises 3 off WNHX 0403.. double-sided inserts, cutting diameter 20mm with 93° approach angle a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with double positive geometry which utilises 3 off APKT 1003.. single-sided inserts, cutting diameter 20mm with 90° approach angle an...

Shoulder face mill with double negative geometry which utilises 3 off TNGX 1004.. double-sided inserts, cutting diameter 20mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 20mm with 90° a...

Copy face mill with double negative geometry which utilises 5 off CNHX 0502.. double-sided inserts, cutting diameter 20mm with 93° approach angle a...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 20mm with 90° a...

Copy face mill with double negative geometry which utilises 5 off CNHX 0502.. double-sided inserts, cutting diameter 20mm with 93° approach angle a...