Products

Extra short series ball-nose end mill with 2 flutes, diameter 5mm with 8mm length of cut, 52mm overall length and 2.5mm full profile radius, accord...

Extra short series ball-nose end mill with 2 flutes, diameter 6mm with 8mm length of cut, 52mm overall length and 3mm full profile radius, accordin...

Extra short series ball-nose end mill with 2 flutes, diameter 7mm with 10mm length of cut, 60mm overall length and 3.5mm full profile radius, accor...

Extra short series ball-nose end mill with 2 flutes, diameter 8mm with 11mm length of cut, 61mm overall length and 4mm full profile radius, accordi...

Short series ball-nose end mill with 2 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 5mm full profile radius, according to...

Short series ball-nose end mill with 2 flutes, diameter 12mm with 26mm length of cut, 83mm overall length and 6mm full profile radius, according to...

Short series ball-nose end mill with 2 flutes, diameter 14mm with 26mm length of cut, 83mm overall length, 37.5mm reach with neck relief and 7mm fu...

Short series ball-nose end mill with 2 flutes, diameter 16mm with 32mm length of cut, 92mm overall length, 43.5mm reach with neck relief and 8mm fu...

Short series ball-nose end mill with 2 flutes, diameter 20mm with 38mm length of cut, 104mm overall length, 53.5mm reach with neck relief and 10mm ...

Short series ball-nose end mill with 2 flutes, diameter 22mm with 38mm length of cut, 104mm overall length, 53.5mm reach with neck relief and 11mm ...

Short series ball-nose end mill with 2 flutes, diameter 3mm with 8mm length of cut, 52mm overall length and 1.5mm full profile radius, according to...

Short series ball-nose end mill with 2 flutes, diameter 30mm with 45mm length of cut, 121mm overall length, 64.5mm reach with neck relief and 15mm ...

Short series ball-nose end mill with 2 flutes, diameter 4mm with 11mm length of cut, 55mm overall length and 2mm full profile radius, according to ...

Short series ball-nose end mill with 2 flutes, diameter 5mm with 13mm length of cut, 57mm overall length and 2.5mm full profile radius, according t...

Short series ball-nose end mill with 2 flutes, diameter 6mm with 13mm length of cut, 57mm overall length and 3mm full profile radius, according to ...

Short series ball-nose end mill with 2 flutes, diameter 8mm with 19mm length of cut, 69mm overall length and 4mm full profile radius, according to ...

C6-BS-SFN4260 is modular tool holder for BS type grooving and parting-off blades with adjustable coolant block. Tool shank according to ISO 26623 (...

Double clamp turning tool for holding a 80° rhombus negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation CN....

Double clamp turning tool for holding a 80° rhombus negative insert with an inscribed circle diameter of 15.575mm, 6.35mm thick (ISO designation C...

Double clamp turning tool for holding a 80° rhombus negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation CN...

Double clamp boring bar for holding a 80° rhombus negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation CN.. ...

Double clamp boring bar for holding a 80° rhombus negative insert with an inscribed circle diameter of 15.575mm, 6.35mm thick (ISO designation CN....

Double clamp turning tool for holding a 80° rhombus negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation CN....

Double clamp turning tool for holding a 80° rhombus negative insert with an inscribed circle diameter of 15.575mm, 6.35mm thick (ISO designation C...

Double clamp turning tool for holding a 80° rhombus negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation CN...

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN....

Double clamp turning tool for holding a round negative insert with a diameter of 12.7mm, 4.76mm thick (ISO designation RN.. 120400 ), left hand si...

Double clamp turning tool for holding a round negative insert with a diameter of 12.7mm, 4.76mm thick (ISO designation RN.. 120400 ), right hand s...

Double clamp turning tool for holding a square negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation SN.. 19...

Double clamp turning tool for holding a square negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation SN.. 19...

Double clamp turning tool for holding a square negative insert with an inscribed circle diameter of 19.05mm, 6.35mm thick (ISO designation SN.. 19...

Double clamp turning tool for holding a 35° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VN...

Double clamp turning tool for holding a 35° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VN...

Double clamp turning tool for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.....

Double clamp turning tool for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7mm, 4.76mm thick (ISO designation WN.....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB....

Screw clamp turning tool for holding a 35° rhombus positive insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation VB....

Regular length double ended end mill with 2 flutes, diameter 1/2" with 13/16" length of cut and 4.1/8" overall length, according to ANSI standard w...

Regular length double ended end mill with 2 flutes, diameter 1/4" with 1/2" length of cut and 3.3/8" overall length, according to ANSI standard wit...

Regular length double ended end mill with 2 flutes, diameter 1/8" with 3/8" length of cut and 3.1/16" overall length, according to ANSI standard wi...

Regular length double ended end mill with 2 flutes, diameter 13/32" with 13/16" length of cut and 4.1/8" overall length, according to ANSI standard...

Regular length double ended end mill with 2 flutes, diameter 3/16" with 7/16" length of cut and 3.1/4" overall length, according to ANSI standard w...