Products

Shank height 20 mm, shank width 6 mm, and overall length 200 mm.

Shank height 20 mm, shank width 8 mm, and overall length 200 mm.

21/32" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 22mm with 90° a...

Shoulder face mill with double negative geometry which utilises 3 off TNGX 1004.. double-sided inserts, cutting diameter 22mm with 90° approach ang...

23/32" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

23/32" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear re...

Jobber length trailer bit drill with straight shank, diameter 0.2500" (1/4) with an overall length of 4" and flute length of 2.3/4" according to AN...

Jobber length trailer bit drill with straight shank, diameter 0.1250" (1/8) with an overall length of 2.3/4" and flute length of 1.5/8" according t...

Jobber length trailer bit drill with straight shank, diameter 0.1719" (11/64) with an overall length of 3.1/4" and flute length of 2.1/8" according...

Jobber length trailer bit drill with straight shank, diameter 0.2656" (17/64) with an overall length of 4.1/8" and flute length of 2.7/8" according...

Jobber length trailer bit drill with straight shank, diameter 0.3125" (5/16) with an overall length of 4.1/2" and flute length of 3.3/16" according...

Jobber length trailer bit drill with straight shank, diameter 0.2188" (7/32) with an overall length of 3.3/4" and flute length of 2.1/2" according ...

Jobber length trailer bit drill with straight shank, diameter 0.2813" (9/32) with an overall length of 4.1/4" and flute length of 2.15/16" accordin...

Jobber length trailer bit drill with straight shank with tang, diameter 0.2813" (9/32) with an overall length of 4.1/4" and flute length of 2.15/16...

Jobber length trailer bit drill with straight shank, diameter 0.2570" (F) with an overall length of 4.1/8" and flute length of 2.7/8" according to ...

Jobber length trailer bit drill with straight shank, diameter 0.1910" (N11) with an overall length of 3.1/2" and flute length of 2.5/16" according ...

Copy face mill with double negative geometry which utilises 2 of RD.. 12T3MOT or RDHT 12T3MO-FA single-sided inserts, cutting diameter to maximum 2...

25/32" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

25/32" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear re...

25/64" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

Disc mill with double positive geometry which utilises 6 off SNHQ 1102.. double-sided inserts, cutting diameter 2.500'' with 90° approach angle and...

Face mill with double positive geometry which utilises 4 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 2...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90...

Shoulder mill with double negative geometry which utilises 4 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 2.500'' with 90°...

Shoulder mill with positve/negative geometry which utilises 4 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 2.500'' with 90°...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 2.500" with 90° approach an...

High feed cutter with positve/negative geometry which utilises 5 off PD.X 09, PDKT 09 or PDMW 09 single-sided inserts, cutting diameter 2.500'' wit...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.209 t...

Face mill with double negative geometry which utilises 5 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 2.500"...

Face mill with positve/negative geometry which utilises 5 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 2.500" ...

Face mill with positve/negative geometry which utilises 5 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 2.500 to maximu...

Face mill with double negative geometry which utilises 6 off HNGX 0604AN.. or XNGX 0604AN.. double-sided inserts, cutting diameter 2.500 to maximum...

Face mill with double negative geometry which utilises 6 off HNGX 0906AN.. or XNGX 0906AN.. double-sided inserts, cutting diameter 2.500 to maximum...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.209 t...

Face mill with double positive geometry which utilises 6 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 2...

Face mill with double negative geometry which utilises 6 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 2.500"...

Face mill with positve/negative geometry which utilises 6 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 2.500 to maximu...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 2.500'' with 90...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 2.500'' with 90...

Shoulder mill with double negative geometry which utilises 6 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 2.500'' with 90°...

Shoulder mill with double negative geometry which utilises 6 of LNEX 1210.. double-sided inserts, cutting diameter 2.500" with 90° approach angle a...

Shoulder mill with positve/negative geometry which utilises 6 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 2.500'' with 90°...

Shoulder face mill with double negative geometry which utilises 6 off TNGX 1004.. double-sided inserts, cutting diameter 2.500'' with 90° approach ...

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 3.000" with 90° approach an...

Copy face mill with double positive geometry which utilises 6 of RD.. 12T3MOT or RDHT 12T3MO-FA single-sided inserts, cutting diameter to maximum 2...

Copy face mill with double negative geometry which utilises 6 off RCMT 10T3MO.. single-sided inserts, cutting diameter 2.500'' with .750'' connecti...

High feed cutter with double negative geometry which utilises 6 of SNGX 1104.. double-sided inserts, cutting diameter 2.500" with 18° approach angl...