Products

Shoulder face mill with double negative geometry which utilises 4 off TNGX 1004.. double-sided inserts, cutting diameter 25mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 25mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 25mm with 90° a...

Shoulder face mill with double negative geometry which utilises 4 off TNGX 1004.. double-sided inserts, cutting diameter 25mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 25mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 25mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 25mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 25mm with 90° a...

Copy face mill with double positive geometry which utilises 2 of RD.. 1003MOT or RDHT 1003MO-FA single-sided inserts, cutting diameter to maximum 2...

Copy face mill with double negative geometry which utilises 2 off RCMT 10T3MO.. single-sided inserts, cutting diameter 25mm with 20mm parallel shan...

Copy face mill with double negative geometry which utilises 3 off RCMT 10T3MO.. single-sided inserts, cutting diameter 25mm with M12 threaded shank...

Copy face mill with double positive geometry which utilises 3 of RD.. 1003MOT or RDHT 1003MO-FA single-sided inserts, cutting diameter to maximum 2...

Copy face mill with double negative geometry which utilises 3 of RNMU 1004MOT.. double-sided inserts, cutting diameter 25mm with M12mm threaded sha...

Copy face mill with double negative geometry which utilises 3 off RCMT 10T3MO.. single-sided inserts, cutting diameter 25mm with 20mm parallel shan...

Copy face mill with double negative geometry which utilises 3 of RNMU 1004MOT.. double-sided inserts, cutting diameter 25mm with 25mm parallel shan...

High feed cutter with positve/negative geometry which utilises 4 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 25mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 4 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 25mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 4 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 25mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 4 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 25mm with 20° approach an...

Copy face mill with double negative geometry which utilises 5 of RD.. 0702MO.. or RD.. 07T1MO.. single-sided inserts, cutting diameter to maximum 2...

High feed cutter with positve/negative geometry which utilises 5 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 25mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 5 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 25mm with 20° approach an...

T-slot mill which utilises 2 off CCMX 060304 single-sided inserts, cutting diameter 25mm with 90° approach angle and 25mm Weldon shank according to...

Shoulder mill with extended flute with positve/negative geometry which utilises 8 off ADMX 11T3.. single-sided inserts, cutting diameter 25mm with ...

Shoulder mill with extended flute with positve/negative geometry which utilises 8 off ADMX 11T3.. single-sided inserts, cutting diameter 25mm with ...

Copy end mill which utilises 1 off RC 25 or RC 25-F single-sided insert, cutting diameter 25mm with 25mm parallel shank according to DIN 1835A, 45m...

Copy end mill with double negative geometry which utilises 3 off XP 25.. single-sided inserts, cutting diameter 25mm with 25mm parallel shank accor...

Copy end mill with double negative geometry which utilises 3 off XP 25.. single-sided inserts, cutting diameter 25mm with 25mm Weldon shank accordi...

Copy end mill with double negative geometry which utilises 2 off ZP 25.. single-sided inserts, cutting diameter 25mm with M12 threaded shank for st...

Copy end mill with double negative geometry which utilises 2 off ZP 25.. single-sided inserts, cutting diameter 25mm with 25mm parallel shank accor...

Copy end mill with double negative geometry which utilises 2 off ZP 25.. single-sided inserts, cutting diameter 25mm with 25mm Weldon shank accordi...

Copy end mill with double negative geometry which utilises 2 off ZP 25.. single-sided inserts, cutting diameter 25mm with 32mm parallel shank accor...

Copy end mill with double negative geometry which utilises 2 off ZP 25.. single-sided inserts, cutting diameter 25mm with 25mm Weldon shank accordi...

Copy end mill with double negative geometry which utilises 2 off ZP 25.. single-sided inserts, cutting diameter 25mm with MT 4 morse taper shank ac...

Face mill with double negative geometry which utilises 2 off HNGX 0604AN.. or XNGX 0604AN.. double-sided inserts, cutting diameter 25 to maximum 32...

Chamfer mill with double negative geometry which utilises 3 off SDEW 0903.. or SDEX 0903.. single-sided inserts, cutting diameter 25 to maximum 37m...

Chamfer mill with double negative geometry which utilises 3 off SDEW 0903.. or SDEX 0903.. single-sided inserts, cutting diameter 25 to maximum 37m...

Face mill with positve/negative geometry which utilises 3 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 25 to maximum 3...

Chamfer mill with double negative geometry which utilises 3 off SOMT 09T3.. single-sided inserts, cutting diameter 25 to maximum 37.8mm with 45° ap...

Chamfer mill with double negative geometry which utilises 3 off SDEW 0903.. or SDEX 0903.. single-sided inserts, cutting diameter 25 to maximum 37m...

Shank height 25 mm, shank width 10 mm, and overall length 200 mm.

Shank height 25 mm, shank width 12 mm, and overall length 200 mm.

Shank height 25 mm, shank width 25 mm, and overall length 200 mm.

Shank height 25 mm, shank width 25 mm, and overall length 200 mm.

Shank height 25 mm, shank width 5 mm, and overall length 200 mm.

Shank height 25 mm, shank width 6 mm, and overall length 200 mm.

26-D 2020 is tool holder to fit blades for grooving and parting-off. Body treated for longer tool life.

26-DU 12 is tool holder to fit blades for grooving and parting-off. Body treated for longer tool life.