Products

Double-sided turning insert, 80° rhomboid with clamping hole with inscribed circle diameter of 1/2", 3/16" thick, 1/32" nose radius, indexing accur...

Insert for hard turning with 2 CBN tipped corners on one-side, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/32" nose radius,...

Double-sided turning insert, 80° rhomboid with clamping hole with inscribed circle diameter of 1/2", 3/16" thick, 3/64" nose radius, indexing accur...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/128" nose radius and indexing accuracy ac...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/128" nose radius and indexing accuracy ac...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 0.5 inch, 0.187 inch thick, 0.008 inch nose radius, indexing a...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 12.7mm, 4.76mm thick, 0.2mm nose radius, indexing accuracy ac...

Double-sided disc milling insert, for a cutting width of .5512" to maximum .7283" with cutting edges with facet, M8330 PVD coated fine grained WC-C...

Double-sided disc milling insert, for a cutting width of .5512" to maximum .7283" with cutting edges with facet, M8340 PVD coated fine grained WC-C...

Double-sided milling insert CNHX 0502, 80° rhomboid and wiper design for a maximum depth of cut of .0394", with .0197" corner radius, an indexing a...

Double-sided milling insert CNHX 0502, 80° rhomboid and wiper design for a maximum depth of cut of .0394", with .0197" corner radius, an indexing a...

Double-sided milling insert CNHX 0502, 80° rhomboid and wiper design for a maximum depth of cut of .0394", with .0394" corner radius, an indexing a...

Double-sided milling insert CNHX 0502, 80° rhomboid and wiper design for a maximum depth of cut of .0394", with .0394" corner radius, an indexing a...

Double-sided milling insert CNM 563, 80° rhomboid for a maximum depth of cut of .5512", with .0472" corner radius, an indexing accuracy according t...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/64" nose radius and indexing accuracy acc...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/64" nose radius and indexing accuracy acc...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 12 with corner radius 0.4 mm. Combination of chipbreaker .NMA flat inser...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/32" nose radius and indexing accuracy acc...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/32" nose radius and indexing accuracy acc...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 12 with corner radius 0.8 mm. Combination of chipbreaker .NMA flat inser...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/32" nose radius and indexing accuracy acc...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/32" nose radius and indexing accuracy acc...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 0.5 inch, 0.187 inch thick, 0.031 inch nose radius and indexin...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/32" nose radius, indexing accuracy accord...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 12 with corner radius 0.8 mm. Combination of chipbreaker .NMA..S flat in...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 3/64" nose radius and indexing accuracy acc...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 3/64" nose radius and indexing accuracy acc...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 12 with corner radius 1.2 mm. Combination of chipbreaker .NMA flat inser...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 3/64" nose radius and indexing accuracy acc...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 0.5 inch, 0.187 inch thick, 0.047 inch nose radius and indexin...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 3/64" nose radius, indexing accuracy accord...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 12 with corner radius 1.2 mm. Combination of chipbreaker .NMA..S flat in...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/16" nose radius and indexing accuracy acc...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/16" nose radius and indexing accuracy acc...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 12 with corner radius 1.6 mm. Combination of chipbreaker .NMA flat inser...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 1/2", 3/16" thick, 1/16" nose radius and indexing accuracy acc...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 5/8", 1/4" thick, 3/64" nose radius and indexing accuracy acco...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 5/8", 1/4" thick, 3/64" nose radius and indexing accuracy acco...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 16 with corner radius 1.2 mm. Combination of chipbreaker .NMA flat inser...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 5/8", 1/4" thick, 3/64" nose radius, indexing accuracy accordi...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 16 with corner radius 1.2 mm. Combination of chipbreaker .NMA..S flat in...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 5/8", 1/4" thick, 1/16" nose radius and indexing accuracy acco...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 16 with corner radius 1.6 mm. Combination of chipbreaker .NMA flat inser...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 3/4", 1/4" thick, 3/64" nose radius and indexing accuracy acco...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 3/4", 1/4" thick, 3/64" nose radius and indexing accuracy acco...

Double-sided Negative turning insert, C - rhombic 80° included angle, size 19 with corner radius 1.2 mm. Combination of chipbreaker .NMA flat inser...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 3/4", 1/4" thick, 1/16" nose radius and indexing accuracy acco...

Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 3/4", 1/4" thick, 1/16" nose radius and indexing accuracy acco...