Products

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 3/8'', 3/16'' thick (ANSI designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 1/2'', 3/16'' thick (ANSI designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 3/8'', 3/16'' thick (ANSI designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 1/2'', 3/16'' thick (ANSI designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 1/2'', 3/16'' thick (ANSI designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation DN....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 9.525mm, 4.76mm thick (ISO designation DN....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 12.7mm, 6.35mm thick (ISO designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 3/8'', 3/16'' thick (ANSI designation DN.....

Double clamp turning tool for holding a 55° rhombus negative insert with an inscribed circle diameter of 1/2'', 3/16'' thick (ANSI designation DN.....

Shim for ISO-D tools, new design since 2016.1, DN.. 1504.. CERAMIC inserts

Shim for ISO-D tools and boring bars, new design since 2016.1, DN.. 1506.. inserts (item on spare part list; DD1504)

Shim for ISO-D tools and boring bars, new design since 2016.1, DN.. 1104.. inserts (item on spare part list; DD11)

Ultra-thin gloves with cut protection for hand movement and a bare hand feel Our ultra-thin Dexterity Pro™ S21TAXRFN gloves match cut protection wi...

Dial Bore Gauge Inch Movable probe pin with carbide ball Graduation: 0.0005" Dial Travel (AGD2): 0.25"0.24-0.4" range is with fixed anvils0.4-0.7...

Indicator graduation: 0.0005”Indicator range: 0.25”Supplied with dial indicatorSupplied in fitted storage case INSIZE Part Numbers:0.7-1.5 - 2323-1...

Indicator graduation: 0.0005”Indicator range: 0.25”Supplied in fitted storage case INSIZE Part Numbers:0.24 to 0.4 - 2323-040.4 to 0.7 - 2323-07

Meets ASME B89.1.10M-2001 standardsLug backBezel locking clamp and limit pointersContact point thread: #4-48UNFSupplied in fitted storage case INSI...

5 Piece Set: Equalling, Round, Square, Three Square, Half Round10 Piece Set: Equalling, Round, Square, Three Square, Half Round, Flat, Crossing, Ba...

DIGITAL GEAR TOOTH CALIPER Resolution .0005"/0.01mmCarbide tipsMeasure the tooth thickness by positioningthe tooth height (for tooth height > 0....

Quickly measure the concentration of coolant, sugar solution, juice and drinksTwo measurement modes: single measurement and automatic average multi...

Modular system tool holder for holding a left hand KHP/KHS turning tool cartridge, shank size 40mm x 50mm, 400mm long for heavy duty machining

Modular system tool holder for holding a left hand KHP/KHS turning tool cartridge, shank size 50mm x 60mm, 450mm long for heavy duty machining

Modular system tool holder for holding a left hand KHP/KHS turning tool cartridge, shank size 60mm x 80mm, 450mm long for heavy duty machining

Modular system tool holder for holding a right hand KHP/KHS turning tool cartridge, shank size 40mm x 50mm, 400mm long for heavy duty machining

Modular system tool holder for holding a right hand KHP/KHS turning tool cartridge, shank size 50mm x 60mm, 450mm long for heavy duty machining

Modular system tool holder for holding a right hand KHP/KHS turning tool cartridge, shank size 60mm x 80mm, 450mm long for heavy duty machining

Modular system tool holder for holding a left hand KTP-(CLS)ANL turning tool cartridge, shank size 50mm x 55mm, 210mm long for wheelset machining

Modular system tool holder for holding a left hand KTP-(CLS)ANL and right hand KTP-(CLS)FNR turning tool cartridge, shank size 50mm x 55mm, 210mm l...

Modular system tool holder for holding a right hand KTP-(CLS)ANR turning tool cartridge, shank size 50mm x 55mm, 210mm long for wheelset machining

Modular system tool holder for holding a right hand KTP-(CLS)ANR and left hand KTP-(CLS)FNL turning tool cartridge, shank size 50mm x 55mm, 210mm l...

TORX key with flag-type grip (item on spare part lists; SV23 / SW21)

TORX key with screwdriver grip (item on spare part list; SH24)

Double-sided turning insert, 55° rhomboid, plain with inscribed circle diameter of 1/2", 3/16" thick, 1/32" nose radius, indexing accuracy accordin...

Double-sided turning insert, 55° rhomboid with clamping hole with inscribed circle diameter of 1/2", 3/16" thick, 1/64" nose radius, indexing accur...

Double-sided turning insert, 55° rhomboid with clamping hole with inscribed circle diameter of 1/2", 3/16" thick, 1/64" nose radius, indexing accur...