Products

Jobber length drill with straight shank, diameter 7.3mm with an overall length of 109mm and flute length of 69mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 7.5mm with an overall length of 109mm and flute length of 69mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 7.8mm with an overall length of 117mm and flute length of 75mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 7.9mm with an overall length of 117mm and flute length of 75mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 8mm with an overall length of 117mm and flute length of 75mm according to NAS907 Type J standard ...

Jobber length drill with straight shank, diameter 8.2mm with an overall length of 117mm and flute length of 75mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 8.4mm with an overall length of 117mm and flute length of 75mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 8.5mm with an overall length of 117mm and flute length of 75mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 8.8mm with an overall length of 125mm and flute length of 81mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 8.9mm with an overall length of 125mm and flute length of 81mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 9mm with an overall length of 125mm and flute length of 81mm according to NAS907 Type J standard ...

Jobber length drill with straight shank, diameter 9.1mm with an overall length of 125mm and flute length of 81mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 9.2mm with an overall length of 125mm and flute length of 81mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 9.3mm with an overall length of 125mm and flute length of 81mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 9.4mm with an overall length of 125mm and flute length of 81mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 9.5mm with an overall length of 125mm and flute length of 81mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 9.6mm with an overall length of 133mm and flute length of 87mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 9.7mm with an overall length of 133mm and flute length of 87mm according to NAS907 Type J standar...

Jobber length drill with straight shank, diameter 9.8mm with an overall length of 133mm and flute length of 87mm according to NAS907 Type J standar...

Plain Metal Slitting SawsHigh Speed Steel  3 1/2 DIAX1/32 WX1 INCH B SLIT SAW

Shank height 3/16 inch, shank width 3/16 inch, and overall length 2.5 inch.

3/4" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride rei...

3/4" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear resi...

3/8" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride rei...

Shank height 3/8 inch, shank width 3/8 inch, and overall length 3 inch.

Shank height 3/8 inch, shank width 3/8 inch, and overall length 4 inch.

Shank height 3/8 inch, shank width 3/8 inch, and overall length 6 inch.

Disc mill with double positive geometry which utilises 8 off SNHQ 1102.. double-sided inserts, cutting diameter 3.000'' with 90° approach angle and...

Disc mill with double positive geometry which utilises 8 off SNHQ 1102.. double-sided inserts, cutting diameter 3.000'' with 90° approach angle and...

High feed cutter with positve/negative geometry which utilises 5 off PD.X 09, PDKT 09 or PDMW 09 single-sided inserts, cutting diameter 3.000'' wit...

Face mill with double positive geometry which utilises 5 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 3...

Face mill with positve/negative geometry which utilises 5 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 3.000" ...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 3.000'' with 90...

Shoulder mill with double negative geometry which utilises 5 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 3.000'' with 90°...

Shoulder face mill with double negative geometry which utilises 5 of TNGX 1606.. double-sided inserts, cutting diameter 3.000" with 90° approach an...

Face mill with double negative geometry which utilises 6 off HNGX 0906AN.. or XNGX 0906AN.. double-sided inserts, cutting diameter 3.000 to maximum...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.709 t...

Face mill with double positive geometry which utilises 6 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 3...

Face mill with double negative geometry which utilises 6 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 3.000"...

Face mill with positve/negative geometry which utilises 6 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 3.000 to maximu...

Face mill with double negative geometry which utilises 7 off HNGX 0604AN.. or XNGX 0604AN.. double-sided inserts, cutting diameter 3.000 to maximum...

Face mill with positve/negative geometry which utilises 7 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 3.000" ...

Shoulder mill with positve/negative geometry which utilises 7 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 3.000'' with 90...

Shoulder mill with double negative geometry which utilises 7 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 3.000'' with 90°...

Shoulder mill with double negative geometry which utilises 7 of LNEX 1210.. double-sided inserts, cutting diameter 3.000" with 90° approach angle a...

Shoulder mill with positve/negative geometry which utilises 7 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 3.000'' with 90°...

Shoulder face mill with double negative geometry which utilises 7 of TNGX 1606.. double-sided inserts, cutting diameter 3.000" with 90° approach an...

Copy face mill with double positive geometry which utilises 7 of RD.. 12T3MOT or RDHT 12T3MO-FA single-sided inserts, cutting diameter to maximum 3...