Products

Mechanic's length drill with tri-flat shank, diameter 0.3906" (25/64) with an overall length of 4.5/16" and flute length of 2.3/4" according to ANS...

Mechanic's length drill with tri-flat shank, diameter 0.4219" (27/64) with an overall length of 4.7/16" and flute length of 2.7/8" according to ANS...

Mechanic's length drill with tri-flat shank, diameter 0.4531" (29/64) with an overall length of 4.5/8" and flute length of 3" according to ANSI sta...

Mechanic's length drill with tri-flat shank, diameter 0.1875" (3/16) with an overall length of 3" and flute length of 1.7/8" according to ANSI stan...

Mechanic's length drill with tri-flat shank, diameter 0.0938" (3/32) with an overall length of 2.1/4" and flute length of 1.1/4" according to ANSI ...

Mechanic's length drill with tri-flat shank, diameter 0.3750" (3/8) with an overall length of 4.1/4" and flute length of 2.11/16" according to ANSI...

Mechanic's length drill with tri-flat shank, diameter 0.4844" (31/64) with an overall length of 4.7/8" and flute length of 3.1/4" according to ANSI...

Mechanic's length drill with tri-flat shank, diameter 0.3125" (5/16) with an overall length of 4" and flute length of 2.1/2" according to ANSI stan...

Mechanic's length drill with tri-flat shank, diameter 0.1563" (5/32) with an overall length of 2.3/4" and flute length of 1.11/16" according to ANS...

Mechanic's length drill with tri-flat shank, diameter 0.0781" (5/64) with an overall length of 2" and flute length of 1" according to ANSI standard...

Mechanic's length drill with tri-flat shank, diameter 0.4375" (7/16) with an overall length of 4.1/2" and flute length of 2.15/16" according to ANS...

Mechanic's length drill with tri-flat shank, diameter 0.2188" (7/32) with an overall length of 3.1/4" and flute length of 2" according to ANSI stan...

Mechanic's length drill with tri-flat shank, diameter 0.1094" (7/64) with an overall length of 2.3/8" and flute length of 1.5/16" according to ANSI...

Mechanic's length drill with tri-flat shank, diameter 0.2813" (9/32) with an overall length of 3.3/4" and flute length of 2.1/4" according to ANSI ...

Mechanic's length drill with tri-flat shank, diameter 0.1406" (9/64) with an overall length of 2.5/8" and flute length of 1.9/16" according to ANSI...

Drill set in plastic TUBE-BOX consisting out of 29 mechanic's length drills with tri-flat shank, 321MD fractional sizes 1/16 up to 1/2" in incremen...

Face mill with positve/negative geometry which utilises 4 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 32 to maximum 4...

Shoulder mill with double negative geometry which utilises 2 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder mill with positve/negative geometry which utilises 2 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder mill with positve/negative geometry which utilises 2 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder mill with double negative geometry which utilises 2 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder mill with positve/negative geometry which utilises 2 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

End mill with double positive geometry which utilises 2 off VCGT 220530F-FA single-sided inserts, cutting diameter 32mm with 90° approach angle and...

End mill with double positive geometry which utilises 2 off VCGT 220530F-FA single-sided inserts, cutting diameter 32mm with 90° approach angle and...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder mill with double negative geometry which utilises 2 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off APKT 1604.. or APET 1604.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with double negative geometry which utilises 3 of LNEX 1210.. double-sided inserts, cutting diameter 32mm with 90° approach angle and...

Shoulder mill with double negative geometry which utilises 3 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder mill with double negative geometry which utilises 3 of LNEX 1210.. double-sided inserts, cutting diameter 32mm with 90° approach angle and...

Shoulder mill with positve/negative geometry which utilises 3 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with double negative geometry which utilises 3 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder mill with positve/negative geometry which utilises 3 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with double negative geometry which utilises 3 of LNEX 1210.. double-sided inserts, cutting diameter 32mm with 90° approach angle and...

Shoulder face mill with double negative geometry which utilises 4 off TNGX 1004.. double-sided inserts, cutting diameter 32mm with 90° approach ang...