Products

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off SOMT 09T3.. single-sided inserts, cutting diameter 32mm with 90° approach angle a...

Shoulder face mill with double negative geometry which utilises 4 off TNGX 1004.. double-sided inserts, cutting diameter 32mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder face mill with double negative geometry which utilises 4 off TNGX 1004.. double-sided inserts, cutting diameter 32mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder face mill with double negative geometry which utilises 5 off TNGX 1004.. double-sided inserts, cutting diameter 32mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder face mill with double negative geometry which utilises 5 off TNGX 1004.. double-sided inserts, cutting diameter 32mm with 90° approach ang...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder face mill with double negative geometry which utilises 5 off TNGX 1004.. double-sided inserts, cutting diameter 32mm with 90° approach ang...

Copy face mill with double negative geometry which utilises 6 off WNHX 0403.. double-sided inserts, cutting diameter 32mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 6 off WNHX 0403.. double-sided inserts, cutting diameter 32mm with 93° approach angle a...

Shoulder mill with positve/negative geometry which utilises 8 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 32mm with 90° a...

Copy face mill with double negative geometry which utilises 2 of RD.. 1604MOT or RDHT 1604MO-FA single-sided inserts, cutting diameter to maximum 3...

High feed cutter with positve/negative geometry which utilises 2 off PD.X 0905ZE.., PDKT 0905.. or PDMW 0905.. single-sided inserts, cutting diamet...

High feed cutter with double negative geometry which utilises 3 of SNGX 1104.. double-sided inserts, cutting diameter 32mm with 18° approach angle ...

Copy face mill with double negative geometry which utilises 4 off RCMT 10T3MO.. single-sided inserts, cutting diameter 32mm with 25mm parallel shan...

Copy face mill with double negative geometry which utilises 3 of RNMU 1205MOT.. double-sided inserts, cutting diameter 32mm with M16mm threaded sha...

High feed cutter with double negative geometry which utilises 3 of SNGX 1104.. double-sided inserts, cutting diameter 32mm with 18° approach angle ...

High feed cutter with double negative geometry which utilises 3 of SNGX 1104.. double-sided inserts, cutting diameter 32mm with 18° approach angle ...

Copy face mill with double negative geometry which utilises 3 off RCMT 10T3MO.. single-sided inserts, cutting diameter 32mm with 25mm parallel shan...

Copy face mill with double negative geometry which utilises 4 off RCMT 10T3MO.. single-sided inserts, cutting diameter 32mm with M16 threaded shank...

Copy face mill with double negative geometry which utilises 4 of RD.. 1003MOT or RDHT 1003MO-FA single-sided inserts, cutting diameter to maximum 3...

Copy face mill with double negative geometry which utilises 4 of RNMU 1004MOT.. double-sided inserts, cutting diameter 32mm with M16mm threaded sha...

Copy face mill with double negative geometry which utilises 4 of RNMU 1004MOT.. double-sided inserts, cutting diameter 32mm with 32mm parallel shan...

High feed cutter with positve/negative geometry which utilises 5 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 32mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 5 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 32mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 5 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 32mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 6 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 32mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 6 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 32mm with 20° approach an...

T-slot mill which utilises 2 off CCMX 08T308 single-sided inserts, cutting diameter 32mm with 90° approach angle and 32mm Weldon shank according to...

Shoulder mill with extended flute with positve/negative geometry which utilises 10 off ADMX 11T3.. single-sided inserts, cutting diameter 32mm with...

Shoulder mill with extended flute with positve/negative geometry which utilises 10 off ADMX 11T3.. single-sided inserts, cutting diameter 32mm with...

Copy end mill which utilises 1 off RC 32 or RC 32-F single-sided insert, cutting diameter 32mm with 32mm parallel shank according to DIN 1835A, 60m...

Copy end mill with double negative geometry which utilises 3 off XP 32.. single-sided inserts, cutting diameter 32mm with 32mm parallel shank accor...

Copy end mill with double negative geometry which utilises 2 off ZP 32.. single-sided inserts, cutting diameter 32mm with M16 threaded shank for st...

Copy end mill with double negative geometry which utilises 2 off ZP 32.. single-sided inserts, cutting diameter 32mm with 32mm parallel shank accor...

Copy end mill with double negative geometry which utilises 2 off ZP 32.. single-sided inserts, cutting diameter 32mm with 32mm Weldon shank accordi...

Copy end mill with double negative geometry which utilises 2 off ZP 32.. single-sided inserts, cutting diameter 32mm with 32mm Weldon shank accordi...

Copy end mill with double negative geometry which utilises 2 off ZP 32.. single-sided inserts, cutting diameter 32mm with MT 4 morse taper shank ac...

Copy end mill with double negative geometry which utilises 2 off ZP 32.. single-sided inserts, cutting diameter 32mm with MT 4 morse taper shank ac...

Face mill with double negative geometry which utilises 3 off HNGX 0604AN.. or XNGX 0604AN.. double-sided inserts, cutting diameter 32 to maximum 39...

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 24.7mm ...

Face mill with positve/negative geometry which utilises 3 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 32mm to...

Face mill with positve/negative geometry which utilises 4 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 32 to maximum 4...

33/64" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

Jobber length drill with straight shank, diameter 0.0625" (1/16) with an overall length of 1.7/8" and flute length of 7/8" according to ANSI standa...