Products

1-5/16" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear r...

1-5/32" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride ...

1-5/32" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear r...

1-5/8" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

1-5/8" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear re...

1-7/16" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride ...

1-7/16" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear r...

1-7/32" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride ...

1-7/32" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear r...

1-7/64" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride ...

1-7/64" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear r...

1-7/8" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear re...

1-9/16" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride ...

1-9/16" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear r...

1-9/32" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride ...

1-9/32" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear r...

0.5" Dia 12" OAL 4-1/2" Flute Length

1/2" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride rei...

Shank height 1/2 inch, shank width 1/2 inch, and overall length 4 inch.

Shank height 1/2 inch, shank width 1/2 inch, and overall length 6 inch.

Shank height 1/4 inch, shank width 1/4 inch, and overall length 2.5 inch.

Shank height 1/4 inch, shank width 1/4 inch, and overall length 4 inch.

Face mill with double negative geometry which utilises 12 off PNMU 1308DN.. or PNMQ 1308DN.. double-sided inserts, cutting diameter 10.000 to maxim...

Face mill with double negative geometry which utilises 14 off HNGX 0906AN.. or XNGX 0906AN.. double-sided inserts, cutting diameter 10.000 to maxim...

Face mill with positve/negative geometry which utilises 14 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 10.000...

Face mill with double negative geometry which utilises 5 off PNMU 1308DN.. or PNMQ 1308DN.. double-sided inserts, cutting diameter 100 to maximum 1...

Shoulder mill with double negative geometry which utilises 5 off LNMU 1607.. or LNGU 1607.. double-sided inserts, cutting diameter 100mm with 90° a...

Disc mill with positve/negative geometry which utilises 10 off SNHQ 1203.. double-sided inserts, cutting diameter 100mm with 90° approach angle and...

Copy face mill with double negative geometry which utilises 5 off RCMT 2006MO.. single-sided inserts, cutting diameter 100mm with 32mm connection b...

High feed cutter with positve/negative geometry which utilises 6 off PD.X 0905ZE.., PDKT 0905.. or PDMW 0905.. single-sided inserts, cutting diamet...

Face mill with double negative geometry which utilises 6 off HNGX 0906AN.. or XNGX 0906AN.. double-sided inserts, cutting diameter 100 to maximum 1...

Face mill with double positive geometry which utilises 6 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 1...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 100mm with 90° ...

Shoulder mill with double negative geometry which utilises 6 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 100mm with 90° a...

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 100mm with 90° approach ang...

Copy face mill with double negative geometry which utilises 6 off RCMT 1204MO.. single-sided inserts, cutting diameter 100mm with 32mm connection b...