Products

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 40mm (ISO designation LNUX 40.... ), left hand 75° sid...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 50.8mm (ISO designation LNUX 50.... ), left hand 75° s...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 40mm (ISO designation LNUX 40.... ), right hand 75° si...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 50.8mm (ISO designation LNUX 50.... ), right hand 75° ...

Lever lock turning tool for holding a rectangular negative insert with a main edge length of 50.8mm (ISO designation LNMX 50.... ), right hand 75° ...

Double-sided milling insert PNMQ 1308, pentagonal for a maximum depth of cut of .3937", with " corner radius, an indexing accuracy according to ISO...

Double-sided milling insert PNMQ 1308, pentagonal for a maximum depth of cut of .3937", with " corner radius, an indexing accuracy according to ISO...

Double-sided milling insert PNMU 1308 with chip-breakers, pentagonal for a maximum depth of cut of .3937", with " corner radius, an indexing accura...

Double-sided milling insert PNMU 1308 with chip-breakers, pentagonal for a maximum depth of cut of .3937", with " corner radius, an indexing accura...

Double-sided milling insert PNMU 1308 with chip-breakers, pentagonal for a maximum depth of cut of .3937", with " corner radius, an indexing accura...

Double-sided milling insert PNMU 1308 with chip-breakers, pentagonal for a maximum depth of cut of .3937", with " corner radius, an indexing accura...

Double-sided milling insert PNMU 1308 with chip-breakers, pentagonal for a maximum depth of cut of .3937", with " corner radius, an indexing accura...

Quickly measure the concentration of coolant Refer to the refraction factor of coolant, for example: the refraction factor of grindingemulsion is ...

Ball nosed copy milling insert with a diameter of .315" for a maximum depth of cut of .0315", CL1 geometry and 2003 PVD coated fine grained WC-Co c...

Ball nosed copy milling insert with a diameter of .315" for a maximum depth of cut of .0315", CL4 geometry and 8215 PVD coated fine grained WC-Co c...

Ball nosed copy milling insert with a diameter of .3937" for a maximum depth of cut of .0394", CL1 geometry and 2003 PVD coated fine grained WC-Co ...

Ball nosed copy milling insert with a diameter of .3937" for a maximum depth of cut of .0394", CL4 geometry and 8215 PVD coated fine grained WC-Co ...

Ball nosed copy milling insert with a diameter of .4724" for a maximum depth of cut of .0472", CL1 geometry and 2003 PVD coated fine grained WC-Co ...

Ball nosed copy milling insert with a diameter of .4724" for a maximum depth of cut of .0472", CL4 geometry and 8215 PVD coated fine grained WC-Co ...

Ball nosed copy milling insert with a diameter of .6299" for a maximum depth of cut of .063", CL1 geometry and 2003 PVD coated fine grained WC-Co c...

Ball nosed copy milling insert with a diameter of .6299" for a maximum depth of cut of .063", CL4 geometry and 8215 PVD coated fine grained WC-Co c...

Ball nosed copy milling insert with a diameter of .7874" for a maximum depth of cut of .0787", CL1 geometry and 2003 PVD coated fine grained WC-Co ...

Ball nosed copy milling insert with a diameter of .7874" for a maximum depth of cut of .0787", CL4 geometry and 8215 PVD coated fine grained WC-Co ...

Ball nosed copy milling insert with a diameter of .9843" for a maximum depth of cut of .0984", CL1 geometry and 2003 PVD coated fine grained WC-Co ...

Ball nosed copy milling insert with a diameter of 1.1811" for a maximum depth of cut of .1181", CL1 geometry and 2003 PVD coated fine grained WC-Co...

Ball nosed copy milling insert with a diameter of 1.2598" for a maximum depth of cut of .126", CL1 geometry and 2003 PVD coated fine grained WC-Co ...

Copy end mill which utilises 1 off PPH 08.., PPHT 08.. or PPHF 08.. single-sided insert, cutting diameter 8mm with 8mm carbide parallel shank accor...

Copy end mill which utilises 1 off PPH 08.., PPHT 08.. or PPHF 08.. single-sided insert, cutting diameter 8mm with 12mm parallel shank according to...

Copy end mill which utilises 1 off PPH 08.., PPHT 08.. or PPHF 08.. single-sided insert, cutting diameter 8mm with 12mm parallel shank according to...

Copy end mill which utilises 1 off PPH 08.., PPHT 08.. or PPHF 08.. single-sided insert, cutting diameter 8mm with 12mm carbide parallel shank acco...

Copy end mill which utilises 1 off PPH 08.., PPHT 08.. or PPHF 08.. single-sided insert, cutting diameter 8mm with 12mm parallel shank according to...

Copy end mill which utilises 1 off PPH 08.., PPHT 08.. or PPHF 08.. single-sided insert, cutting diameter 8mm with 12mm carbide parallel shank acco...

Copy end mill which utilises 1 off PPH 10, PPHE 10, PPHT 10 or PPHF 10 single-sided insert, cutting diameter 10mm with 10mm carbide parallel shank ...

Copy end mill which utilises 1 off PPH 10.., PPHE 10.., PPHT 10.. or PPHF 10.. single-sided insert, cutting diameter 10mm with 12mm parallel shank ...

Copy end mill which utilises 1 off PPH 10, PPHE 10, PPHT 10 or PPHF 10 single-sided insert, cutting diameter 10mm with 12mm carbide parallel shank ...

Copy end mill which utilises 1 off PPH 10.., PPHE 10.., PPHT 10.. or PPHF 10.. single-sided insert, cutting diameter 10mm with 12mm parallel shank ...

Copy end mill which utilises 1 off PPH 10, PPHE 10, PPHT 10 or PPHF 10 single-sided insert, cutting diameter 10mm with 12mm carbide parallel shank ...

Copy end mill which utilises 1 off PPH 10.., PPHE 10.., PPHT 10.. or PPHF 10.. single-sided insert, cutting diameter 10mm with 12mm parallel shank ...

Copy end mill which utilises 1 off PPH 10, PPHE 10, PPHT 10 or PPHF 10 single-sided insert, cutting diameter 10mm with 12mm carbide parallel shank ...

Copy end mill which utilises 1 off PPH 12.., PPHE 12.., PPHT 12.. or PPHF 12.. single-sided insert, cutting diameter 12mm with 12mm parallel shank ...

Copy end mill which utilises 1 off PPH 12, PPHE 12, PPHT 12 or PPHF 12 single-sided insert, cutting diameter 12mm with 12mm carbide parallel shank ...

Copy end mill which utilises 1 off PPH 12.., PPHE 12.., PPHT 12.. or PPHF 12.. single-sided insert, cutting diameter 12mm with 12mm parallel shank ...

Copy end mill which utilises 1 off PPH 12, PPHE 12, PPHT 12 or PPHF 12 single-sided insert, cutting diameter 12mm with 12mm carbide parallel shank ...

Copy end mill which utilises 1 off PPH 12.., PPHE 12.., PPHT 12.. or PPHF 12.. single-sided insert, cutting diameter 12mm with 12mm parallel shank ...

Copy end mill which utilises 1 off PPH 12.., PPHE 12.., PPHT 12.. or PPHF 12.. single-sided insert, cutting diameter 12mm with 16mm parallel shank ...

Copy end mill which utilises 1 off PPH 12, PPHE 12, PPHT 12 or PPHF 12 single-sided insert, cutting diameter 12mm with 16mm carbide parallel shank ...