Products

Standard length drill with 1/2" reduced straight shank, diameter 0.6250" (5/8) with an overall length of 6" and flute length of 3" according to ANS...

Standard length drill with 1/2" reduced straight shank, diameter 0.8750" (7/8) with an overall length of 6" and flute length of 3" according to ANS...

Standard length drill with 1/2" reduced straight shank, diameter 0.5625" (9/16) with an overall length of 6" and flute length of 3" according to AN...

0.5000 OD x 2.0000 FL x 4.0000 OAL FC18 Square Series: 3000

0.2500 OD x 0.7500 FL x 2.5000 OAL FC18 Radius 0.0100 Series: 3000

0.3750 OD x 0.8750 FL x 2.5000 OAL FC18 Radius 0.0100 Series: 3000

35/64" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

Shoulder mill with positve/negative geometry which utilises 3 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 35mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 35mm with 90° a...

Shoulder face mill with double negative geometry which utilises 5 off TNGX 1004.. double-sided inserts, cutting diameter 35mm with 90° approach ang...

Copy face mill with double negative geometry which utilises 6 off WNHX 0403.. double-sided inserts, cutting diameter 35mm with 93° approach angle a...

High feed cutter with double negative geometry which utilises 3 of SNGX 1104.. double-sided inserts, cutting diameter 35mm with 18° approach angle ...

Highly versatile 12˚ high feed mill utilising single sided SO.. 12 style inserts with APMX of 1,9 mm Cutting diameter 17.3 mm with 12° approach an...

Copy face mill with double negative geometry which utilises 3 of RD.. 12T3MOT or RDHT 12T3MO-FA single-sided inserts, cutting diameter to maximum 3...

High feed cutter with double negative geometry which utilises 3 of SNGX 1104.. double-sided inserts, cutting diameter 35mm with 18° approach angle ...

Highly versatile 12˚ high feed mill utilising single sided SO.. 12 style inserts with APMX of 1,9 mm Cutting diameter 17.3 mm with 12° approach an...

Highly versatile 12˚ high feed mill utilising single sided SO.. 12 style inserts with APMX of 1,9 mm Cutting diameter 17.3 mm with 12° approach an...

Copy face mill with double negative geometry which utilises 4 off RCMT 10T3MO.. single-sided inserts, cutting diameter 35mm with M16 threaded shank...

Copy face mill with double negative geometry which utilises 4 of RD.. 12T3MOT or RDHT 12T3MO-FA single-sided inserts, cutting diameter to maximum 3...

Copy face mill with double negative geometry which utilises 4 of RNMU 1004MOT.. double-sided inserts, cutting diameter 35mm with M16mm threaded sha...

Copy face mill with double negative geometry which utilises 5 of RD.. 1003MOT or RDHT 1003MO-FA single-sided inserts, cutting diameter to maximum 3...

High feed cutter with positve/negative geometry which utilises 5 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 35mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 6 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 35mm with 20° approach an...

High feed cutter with positve/negative geometry which utilises 6 off BNGX 10T3.. or ANHX 10T3.. inserts, cutting diameter 35mm with 20° approach an...

Chamfer mill with double negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 90.6mm with 15° ap...

Chamfer mill with double negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 87.3mm with 25° ap...

Chamfer mill with double negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 85.1mm with 30° ap...

Chamfer mill with double negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 82.4mm with 35° ap...

Chamfer mill with positve/negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 79.4mm with 40° a...

Chamfer mill with positve/negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 76.1mm with 45° a...

Chamfer mill with positve/negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 72.4mm with 50° a...

Chamfer mill with positve/negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 68.4mm with 55° a...

Chamfer mill with positve/negative geometry which utilises 6 off XPHT 1604.. single-sided inserts, cutting diameter 35 to maximum 64.2mm with 60° a...

Carbon Steel – Rethreading

37/64" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

0.2500 OD x 0.3750 FL x 2.0000 OAL FC20 Radius 0.0300 Series: 3412

0.2500 OD x 0.7500 FL x 2.5000 OAL FC20 Radius 0.0200 Series: 3412

0.3750 OD x 0.5000 FL x 2.5000 OAL FC20 Radius 0.0300 Series: 3412

0.3750 OD x 1.0000 FL x 2.5000 OAL FC20 Radius 0.0200 Series: 3412

0.5000 OD x 1.0000 FL x 3.0000 OAL FC20 Radius 0.0300 Series: 3412

0.5000 OD x 1.2500 FL x 3.0000 OAL FC20 Radius 0.0300 Series: 3412

0.6250 OD x 1.5000 FL x 3.5000 OAL FC20 Radius 0.0300 Series: 3412

0.2500 OD x 1.0000 FL x 2.5000 OAL FC19 Square Series: 3835

0.5000 OD x 1.2500 FL x 3.0000 OAL FC19 Square Series: 3835

0.5000 OD x 2.0000 FL x 4.0000 OAL FC19 Square Series: 3835

39/64" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

Shank diameter 3 mm.