Products

Aircraft extension-length drill with straight shank, diameter 0.2420" (C) with an overall length of 6" and flute length of 2.3/4" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.2460" (D) with an overall length of 6" and flute length of 2.3/4" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.2570" (F) with an overall length of 6" and flute length of 2.7/8" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.2610" (G) with an overall length of 6" and flute length of 2.7/8" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.2660" (H) with an overall length of 6" and flute length of 2.7/8" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.2720" (I) with an overall length of 6" and flute length of 2.7/8" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.2770" (J) with an overall length of 6" and flute length of 2.7/8" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.2810" (K) with an overall length of 6" and flute length of 2.15/16" according to NA...

Aircraft extension-length drill with straight shank, diameter 0.2900" (L) with an overall length of 6" and flute length of 2.15/16" according to NA...

Aircraft extension-length drill with straight shank, diameter 0.2950" (M) with an overall length of 6" and flute length of 3.1/16" according to NAS...

Aircraft extension-length drill with straight shank, diameter 0.3020" (N) with an overall length of 6" and flute length of 3.1/16" according to NAS...

Aircraft extension-length drill with straight shank, diameter 0.3160" (O) with an overall length of 6" and flute length of 3.3/16" according to NAS...

Aircraft extension-length drill with straight shank, diameter 0.3230" (P) with an overall length of 6" and flute length of 3.5/16" according to NAS...

Aircraft extension-length drill with straight shank, diameter 0.3320" (Q) with an overall length of 6" and flute length of 3.7/16" according to NAS...

Aircraft extension-length drill with straight shank, diameter 0.3390" (R) with an overall length of 6" and flute length of 3.7/16" according to NAS...

Aircraft extension-length drill with straight shank, diameter 0.3480" (S) with an overall length of 6" and flute length of 3.1/2" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.3580" (T) with an overall length of 6" and flute length of 3.1/2" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.3680" (U) with an overall length of 6" and flute length of 3.5/8" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.3772" (V) with an overall length of 6" and flute length of 3.5/8" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.3860" (W) with an overall length of 6" and flute length of 3.3/4" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.3970" () with an overall length of 6" and flute length of 3.3/4" according to NAS90...

Aircraft extension-length drill with straight shank, diameter 0.4040" (Y) with an overall length of 6" and flute length of 3.7/8" according to NAS9...

Aircraft extension-length drill with straight shank, diameter 0.4130" (Z) with an overall length of 6" and flute length of 3.7/8" according to NAS9...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 50mm with 90° a...

End mill with double positive geometry which utilises 3 off VCGT 220530F-FA single-sided inserts, cutting diameter 50mm with 90° approach angle and...

High feed cutter with positve/negative geometry which utilises 4 off PD.X 0905ZE.., PDKT 0905.. or PDMW 0905.. single-sided inserts, cutting diamet...

Face mill with double negative geometry which utilises 4 off HNGX 0604AN.. or XNGX 0604AN.. double-sided inserts, cutting diameter 50 to maximum 57...

Face mill with double negative geometry which utilises 4 off HNGX 0906AN.. or XNGX 0906AN.. double-sided inserts, cutting diameter 50 to maximum 61...

Copy face mill with positve/negative geometry which utilises 4 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 42.6mm ...

Face mill with double positive geometry which utilises 4 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 5...

Face mill with double negative geometry which utilises 4 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 50mm t...

Face mill with positve/negative geometry which utilises 4 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 50mm to...

Shoulder mill with double negative geometry which utilises 4 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 50mm with 90° ap...

Shoulder mill with positve/negative geometry which utilises 4 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 50mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 50mm with 90° approach angl...

Copy face mill with double negative geometry which utilises 4 off RCMT 1204MO.. single-sided inserts, cutting diameter 50mm with 22mm connection bo...

High feed cutter with positve/negative geometry which utilises 5 off PD.X 0905ZE.., PDKT 0905.. or PDMW 0905.. single-sided inserts, cutting diamet...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 42.6mm ...

Face mill with double positive geometry which utilises 5 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 5...

Face mill with double negative geometry which utilises 5 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 50mm t...

Face mill with positve/negative geometry which utilises 5 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 50 to maximum 5...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 50mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 50mm with 90° a...

Shoulder mill with double negative geometry which utilises 5 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 50mm with 90° ap...

Shoulder mill with double negative geometry which utilises 5 of LNEX 1210.. double-sided inserts, cutting diameter 50mm with 90° approach angle and...

Shoulder mill with positve/negative geometry which utilises 5 off SDMT 1205.. single-sided inserts, cutting diameter 50mm with 90° approach angle a...

Shoulder mill with positve/negative geometry which utilises 5 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 50mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 5 off TNGX 1004.. double-sided inserts, cutting diameter 50mm with 90° approach ang...