Products

Jobber length drill with taper shank, diameter 25mm with an overall length of 281mm and flute length of 160mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 26mm with an overall length of 286mm and flute length of 165mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 26.5mm with an overall length of 286mm and flute length of 165mm according to DIN 345 standard with ...

Jobber length drill with taper shank, diameter 28mm with an overall length of 291mm and flute length of 170mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 30mm with an overall length of 296mm and flute length of 175mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 32mm with an overall length of 334mm and flute length of 185mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 5mm with an overall length of 133mm and flute length of 52mm according to DIN 345 standard with 118°...

Jobber length drill with taper shank, diameter 5.5mm with an overall length of 138mm and flute length of 57mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 6mm with an overall length of 138mm and flute length of 57mm according to DIN 345 standard with 118°...

Jobber length drill with taper shank, diameter 6.8mm with an overall length of 150mm and flute length of 69mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 7mm with an overall length of 150mm and flute length of 69mm according to DIN 345 standard with 118°...

Jobber length drill with taper shank, diameter 7.5mm with an overall length of 150mm and flute length of 69mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 8.5mm with an overall length of 156mm and flute length of 75mm according to DIN 345 standard with 11...

Jobber length drill with taper shank, diameter 9mm with an overall length of 162mm and flute length of 81mm according to DIN 345 standard with 118°...

Jobber length drill with taper shank, diameter 9.5mm with an overall length of 162mm and flute length of 81mm according to DIN 345 standard with 11...

Shank diameter 5 mm.

Face mill with double negative geometry which utilises 8 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 6.000"...

Face mill with double positive geometry which utilises 9 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 6...

Face mill with positve/negative geometry which utilises 10 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 6.000"...

Face mill with double positive geometry which utilises 12 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter ...

Face mill with double negative geometry which utilises 12 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 6.000...

Face mill with double negative geometry which utilises 14 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 6.000...

Face mill with positve/negative geometry which utilises 14 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 6.000"...

Face mill with double negative geometry which utilises 8 off HNGX 0906AN.. or XNGX 0906AN.. double-sided inserts, cutting diameter 6.000 to maximum...

Face mill with double negative geometry which utilises 8 off PNMU 1308DN.. or PNMQ 1308DN.. double-sided inserts, cutting diameter 6.000 to maximum...

Disc mill with double positive geometry which utilises 16 off SNHQ 1102.. double-sided inserts, cutting diameter 6.000'' with 90° approach angle an...

Shoulder mill with positve/negative geometry which utilises 10 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 6.000'' with 9...

Disc mill with double positive geometry which utilises 16 off SNHQ 1102.. double-sided inserts, cutting diameter 6.000'' with 90° approach angle an...

63/64" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride r...

63/64" Diameter HSS (M4) For use with steels and cast irons 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride reinforces the wear re...

Disc mill with positve/negative geometry which utilises 6 off SNHQ 1102.. double-sided inserts, cutting diameter 63mm with 90° approach angle and 1...

Disc mill with positve/negative geometry which utilises 6 off SNHQ 1103.. double-sided inserts, cutting diameter 63mm with 90° approach angle and 1...

Disc mill with positve/negative geometry which utilises 6 off SNHQ 1203.. double-sided inserts, cutting diameter 63mm with 90° approach angle and 1...

Face mill with double positive geometry which utilises 4 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 6...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 63mm with 90° a...

Shoulder mill with double negative geometry which utilises 4 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 63mm with 90° ap...

Shoulder mill with double negative geometry which utilises 4 off LNMU 1607.. or LNGU 1607.. double-sided inserts, cutting diameter 63mm with 90° ap...

Shoulder mill with positve/negative geometry which utilises 4 of TDMT 1704.. or TDET 1704.. single-sided inserts, cutting diameter 63mm with 90° ap...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 63mm with 90° approach angl...

End mill with double positive geometry which utilises 4 off VCGT 220530F-FA single-sided inserts, cutting diameter 63mm with 90° approach angle and...

Copy face mill with double negative geometry which utilises 4 off RCMT 1606MO.. single-sided inserts, cutting diameter 63mm with 22mm connection bo...

High feed cutter with positve/negative geometry which utilises 5 off PD.X 0905ZE.., PDKT 0905.. or PDMW 0905.. single-sided inserts, cutting diamet...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 55.6mm ...

Face mill with positve/negative geometry which utilises 5 off OD.. 0605ZZ.. or RP.. 1505MO.. single-sided inserts, cutting diameter 63 to maximum 7...

Face mill with double negative geometry which utilises 5 of ONMX 0605.., ONMX 0605..-W or SNMX 1705.. double-sided inserts, cutting diameter 63mm t...

Face mill with positve/negative geometry which utilises 5 of SDET 13T3.., SDMT 13T3.. or XDET 13T3.. single-sided inserts, cutting diameter 63mm to...

Face mill with positve/negative geometry which utilises 5 off SEET 09T3AF.. or SEMT 09T3AF.. single-sided inserts, cutting diameter 63 to maximum 7...

Face mill with positve/negative geometry which utilises 5 off SNKT 1205AZ.. or SNMT 1205AZ.. double-sided inserts, cutting diameter 63 to maximum 7...