Products

Shoulder mill with positve/negative geometry which utilises 9 off SOMT 09T3.. single-sided inserts, cutting diameter 80mm with 90° approach angle a...

High feed cutter with double negative geometry which utilises 9 of SNGX 1104.. double-sided inserts, cutting diameter 80mm with 18° approach angle ...

Face mill with double negative geometry which utilises 10 off HNGX 0604AN.. or XNGX 0604AN.. double-sided inserts, cutting diameter 80 to maximum 8...

Shoulder mill with positve/negative geometry which utilises 10 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 80mm with 90° ...

Shoulder mill with double negative geometry which utilises 10 of LNEX 1210.. double-sided inserts, cutting diameter 80mm with 90° approach angle an...

Shoulder face mill with double negative geometry which utilises 10 off TNGX 1004.. double-sided inserts, cutting diameter 80mm with 90° approach an...

Shoulder mill with positve/negative geometry which utilises 5 off APKT 1604.. or APET 1604.. single-sided inserts, cutting diameter 80mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 7 off APKT 1604.. or APET 1604.. single-sided inserts, cutting diameter 80mm with 90° a...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1102.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1103.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1203.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1204.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Shoulder mill with extended flute with double negative geometry which utilises 2 off LNET 1606.. and 26 SN.. 1305.. double-sided inserts, cutting d...

Shoulder mill with extended flute with double negative geometry which utilises 2 off LNET 1606.. and 26 SN.. 1305.. double-sided inserts, cutting d...

Shoulder mill with extended flute with double negative geometry which utilises 2 off LNET 1606.. and 26 SN.. 1305.. double-sided inserts, cutting d...

Shoulder mill with extended flute with positve/negative geometry which utilises 32 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 32 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 28 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 3 off APE. 1504.. and 30 SPE. 1204.. single-sided inserts, cutting ...

Shoulder mill with extended flute with positve/negative geometry which utilises 3 off APE. 1504.. and 30 SPE. 1204.. single-sided inserts, cutting ...

Shoulder mill with extended flute with positve/negative geometry which utilises 16 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 24 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 64 off SDGX 12 or SDMX 12 single-sided inserts, cutting diameter 80...

Chamfer mill with double negative geometry which utilises 1 off SOMT 09T3.. single-sided insert, cutting diameter 8 to maximum 20.5mm with 45° appr...

Shank diameter 8 mm.

Shank height 8 mm, shank width 6 mm, and overall length 200 mm.

Shank height 8 mm, shank width 8 mm, and overall length 100 mm.

Shank height 8 mm, shank width 8 mm, and overall length 160 mm.

Shank height 8 mm, shank width 8 mm, and overall length 200 mm.

Shank height 8 mm, shank width 8 mm, and overall length 200 mm.

9/16" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride re...

Face mill with double positive geometry which utilises 7 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 9...

Integral pocket type boring head size 22 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 24 to 30...

Integral pocket type boring head size 27 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 29 to 40...

Integral pocket type boring head size 27 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 29 to 40...

Integral pocket type boring head size 32 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 39 to 50...

Integral pocket type boring head size 32 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 39 to 50...

Integral pocket type boring head size 32 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 39 to 50...

Micro boring head size 42 with a 2 micron adjusting accuracy for finishing within a diamerter range of 16 to 34mm, to hold a 12mm ISO boring bar fo...

Micro boring head size 42 with a 2 micron adjusting accuracy for finishing within a diamerter range of 20 to 38mm, to hold a 16mm ISO boring bar fo...

Integral pocket type boring head size 42 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 49 to 65...

Integral pocket type boring head size 42 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 49 to 65...

Integral pocket type boring head size 54 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 63 to 82...

Integral pocket type boring head size 54 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 63 to 82...

Cartridge type boring head size 68 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 80 to 102mm, c...

Cartridge type boring head size 68 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 80 to 102mm, c...

Cartridge type boring head size 85 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 100 to 125mm, ...

Cartridge type boring head size 85 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 100 to 125mm, ...