Products

Shoulder mill with positve/negative geometry which utilises 7 off APKT 1604.. or APET 1604.. single-sided inserts, cutting diameter 80mm with 90° a...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1102.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1103.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1203.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1204.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Shoulder mill with extended flute with double negative geometry which utilises 2 off LNET 1606.. and 26 SN.. 1305.. double-sided inserts, cutting d...

Shoulder mill with extended flute with double negative geometry which utilises 2 off LNET 1606.. and 26 SN.. 1305.. double-sided inserts, cutting d...

Shoulder mill with extended flute with double negative geometry which utilises 2 off LNET 1606.. and 26 SN.. 1305.. double-sided inserts, cutting d...

Shoulder mill with extended flute with positve/negative geometry which utilises 32 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 32 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 28 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 3 off APE. 1504.. and 30 SPE. 1204.. single-sided inserts, cutting ...

Shoulder mill with extended flute with positve/negative geometry which utilises 3 off APE. 1504.. and 30 SPE. 1204.. single-sided inserts, cutting ...

Shoulder mill with extended flute with positve/negative geometry which utilises 16 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 24 off ADMX 16 or ADEX 16 single-sided inserts, cutting diameter 80...

Shoulder mill with extended flute with positve/negative geometry which utilises 64 off SDGX 12 or SDMX 12 single-sided inserts, cutting diameter 80...

Chamfer mill with double negative geometry which utilises 1 off SOMT 09T3.. single-sided insert, cutting diameter 8 to maximum 20.5mm with 45° appr...

Shank diameter 8 mm.

Shank height 8 mm, shank width 6 mm, and overall length 200 mm.

Shank height 8 mm, shank width 8 mm, and overall length 100 mm.

Shank height 8 mm, shank width 8 mm, and overall length 160 mm.

Shank height 8 mm, shank width 8 mm, and overall length 200 mm.

Shank height 8 mm, shank width 8 mm, and overall length 200 mm.

9/16" Diameter Super Cobalt (T15) For use with high nickel alloys and materials 132 deg drill point angle Coatings: TiN COATED: Titanium Nitride re...

Face mill with double positive geometry which utilises 7 off OEHT 0604AE.., REHT 1604M0.. or XEHT 0604AE.. single-sided inserts, cutting diameter 9...

Integral pocket type boring head size 22 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 24 to 30...

Integral pocket type boring head size 27 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 29 to 40...

Integral pocket type boring head size 27 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 29 to 40...

Integral pocket type boring head size 32 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 39 to 50...

Integral pocket type boring head size 32 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 39 to 50...

Integral pocket type boring head size 32 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 39 to 50...

Micro boring head size 42 with a 2 micron adjusting accuracy for finishing within a diamerter range of 16 to 34mm, to hold a 12mm ISO boring bar fo...

Micro boring head size 42 with a 2 micron adjusting accuracy for finishing within a diamerter range of 20 to 38mm, to hold a 16mm ISO boring bar fo...

Integral pocket type boring head size 42 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 49 to 65...

Integral pocket type boring head size 42 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 49 to 65...

Integral pocket type boring head size 54 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 63 to 82...

Integral pocket type boring head size 54 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 63 to 82...

Cartridge type boring head size 68 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 80 to 102mm, c...

Cartridge type boring head size 68 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 80 to 102mm, c...

Cartridge type boring head size 85 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 100 to 125mm, ...

Cartridge type boring head size 85 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 100 to 125mm, ...

Cartridge type boring head size 100 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 125 to 160mm,...

Cartridge type boring head size 100 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 125 to 160mm,...

Cartridge type boring head size 200 with 90° approach angle and 2 micron adjusting accuracy for finishing within a diamerter range of 160 to 220mm,...

Jobber length drill with straight shank, diameter 1mm with an overall length of 34mm and flute length of 12mm according to DIN 338 standard with 11...

Jobber length drill with straight shank, diameter 1.1mm with an overall length of 36mm and flute length of 14mm according to DIN 338 standard with ...

Jobber length drill with straight shank, diameter 1.2mm with an overall length of 38mm and flute length of 16mm according to DIN 338 standard with ...

Jobber length drill with straight shank, diameter 1.3mm with an overall length of 38mm and flute length of 16mm according to DIN 338 standard with ...