Grooving And Part Off Inserts

Double ended circlip grooving insert, with a 1.35mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended parting and grooving insert, 16.4mm long with a 4mm cutting width and 0.2mm corner radii, 6° front angle to reduce pip and burr on the...

Double ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.2mm corner radii, 6° front angle to reduce pip and burr on the...

Double ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.2mm corner radii, 15° front angle to reduce pip and burr on th...

Double ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.2mm corner radii, 6° front angle to reduce pip and burr on the...

Double ended parting and grooving insert, 30mm long with a 8mm cutting width and 4mm full radius, an accuracy according to tolerance class-M and ch...

Double ended parting and grooving insert, 30mm long with a 8mm cutting width and 0.8mm corner radii, an accuracy according to tolerance class-M and...

Single ended parting and grooving insert, with a 1.6mm cutting width and 0.16mm corner radii, an accuracy according to tolerance class-M and chip-b...

Single ended parting and grooving insert, with a 1.5mm cutting width and 0.16mm corner radii, an accuracy according to tolerance class-M and chip-b...

Single ended parting and grooving insert, 16.4mm long with a 6mm cutting width and 3mm full radius, an accuracy according to tolerance class-M and ...

Single ended parting and grooving insert, 16.4mm long with a 4mm cutting width and 2mm full radius, an accuracy according to tolerance class-M and ...

Single ended parting and grooving insert, 16.4mm long with a 4mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.2mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 6mm cutting width and 0.8mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 5mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 4mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 6mm cutting width and 0.8mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 5mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 4mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Single ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Double ended parting and grooving insert, 16.4mm long with a 6mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Double ended parting and grooving insert, 16.4mm long with a 5mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Double ended parting and grooving insert, 16.4mm long with a 4mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...

Double ended parting and grooving insert, 16.4mm long with a 4mm cutting width and 0.2mm corner radii, an accuracy according to tolerance class-M a...

Double ended parting and grooving insert, 12.6mm long with a 4mm cutting width and 0.4mm corner radii, an accuracy according to tolerance class-M a...