Milling

Rounded tree burr (F shape), diameter 8mm with 20mm length of cut, 65mm overall length and 6mm shank, carbide tipped with toughened and hardened st...

Rounded tree burr (F shape), diameter 6.3mm with 12.7mm length of cut, 45mm overall length and 3mm shank, carbide tipped with toughened and hardene...

Rounded tree burr (F shape), diameter 6mm with 18mm length of cut, 50mm overall length and 6mm shank, solid carbide with bright finish, VA single c...

Rounded tree burr (F shape), diameter 3mm with 14mm length of cut, 38mm overall length and 3mm shank, solid carbide with bright finish, VA single c...

Oval burr (E shape), diameter 12.7mm with 22mm length of cut, 67mm overall length and 6mm shank, carbide tipped with toughened and hardened steel s...

Oval burr (E shape), diameter 9.6mm with 16mm length of cut, 60mm overall length and 6mm shank, carbide tipped with toughened and hardened steel sh...

Oval burr (E shape), diameter 8mm with 15mm length of cut, 60mm overall length and 6mm shank, carbide tipped with toughened and hardened steel shan...

Ball burr (D shape), diameter 12.7mm with 11mm length of cut, 56mm overall length and 6mm shank, carbide tipped with toughened and hardened steel s...

Ball burr (D shape), diameter 9.6mm with 8mm length of cut, 54mm overall length and 6mm shank, carbide tipped with toughened and hardened steel sha...

Ball burr (D shape), diameter 8mm with 6mm length of cut, 52mm overall length and 6mm shank, carbide tipped with toughened and hardened steel shank...

Ball burr (D shape), diameter 6.3mm with 5mm length of cut, 38mm overall length and 3mm shank, carbide tipped with toughened and hardened steel sha...

Ball burr (D shape), diameter 6mm with 4.7mm length of cut, 50mm overall length and 6mm shank, solid carbide with bright finish, VA single cut flut...

Ball burr (D shape), diameter 3mm with 2.5mm length of cut, 38mm overall length and 3mm shank, solid carbide with bright finish, VA single cut flut...

Cylinder burr with ball nose (C shape), diameter 12.7mm with 25mm length of cut, 70mm overall length and 6mm shank, carbide tipped with toughened a...

Cylinder burr with ball nose (C shape), diameter 8mm with 19mm length of cut, 64mm overall length and 6mm shank, carbide tipped with toughened and ...

Cylinder burr with ball nose (C shape), diameter 9.6mm with 19mm length of cut, 64mm overall length and 6mm shank, carbide tipped with toughened an...

Cylinder burr with ball nose (C shape), diameter 6.3mm with 12.7mm length of cut, 45mm overall length and 3mm shank, carbide tipped with toughened ...

Cylinder burr with ball nose (C shape), diameter 6mm with 18mm length of cut, 50mm overall length and 6mm shank, solid carbide with bright finish, ...

Cylinder burr with ball nose (C shape), diameter 3mm with 14mm length of cut, 38mm overall length and 3mm shank, solid carbide with bright finish, ...

Cylinder burr without end cut (A shape), diameter 12.7mm with 25mm length of cut, 70mm overall length and 6mm shank, carbide tipped with toughened ...

Cylinder burr without end cut (A shape), diameter 9.6mm with 19mm length of cut, 64mm overall length and 6mm shank, carbide tipped with toughened a...

Cylinder burr without end cut (A shape), diameter 8mm with 19mm length of cut, 64mm overall length and 6mm shank, carbide tipped with toughened and...

Cylinder burr without end cut (A shape), diameter 6.3mm with 12.7mm length of cut, 45mm overall length and 3mm shank, carbide tipped with toughened...

Cylinder burr without end cut (A shape), diameter 6mm with 18mm length of cut, 50mm overall length and 6mm shank, solid carbide with bright finish,...

Cylinder burr without end cut (A shape), diameter 3mm with 14mm length of cut, 38mm overall length and 3mm shank, solid carbide with bright finish,...

Single-sided milling insert OEHT 0604 with chip-breakers, octagonal for a maximum depth of cut of .1299", with " corner radius, an indexing accurac...

Single-sided milling insert PDKX 0905, pentagonal for a maximum depth of cut of .0787", with " corner radius, an indexing accuracy according to ISO...

Copy end mill which utilises 1 off RC 12 or RC 12-F single-sided insert, cutting diameter 12mm with M6 threaded shank for standard modular tool-hol...

Single-sided milling insert REHT 1604 with chip-breakers, round for a maximum depth of cut of .1575", with " corner radius, an indexing accuracy ac...

Single-sided milling insert OEHT 0604 with chip-breakers, octagonal for a maximum depth of cut of .1299", with " corner radius, an indexing accurac...

Double-sided milling insert LNGX 1205, rectangular for a maximum depth of cut of .3543", with .0315" corner radius, an indexing accuracy according ...

Single-sided milling insert OEHT 0604 with chip-breakers, octagonal for a maximum depth of cut of .1299", with " corner radius, an indexing accurac...

Double-sided milling insert LNGX 1205, rectangular for a maximum depth of cut of .3543", with .0315" corner radius, an indexing accuracy according ...

Double-sided milling insert LNGX 1205, rectangular for a maximum depth of cut of .3543", with .0315" corner radius, an indexing accuracy according ...

Double-sided milling insert LNGX 1205, rectangular for a maximum depth of cut of .3543", with .0157" corner radius, an indexing accuracy according ...

High feed cutter with positve/negative geometry which utilises 8 off PD.X 0905ZE.., PDKT 0905.. or PDMW 0905.. single-sided inserts, cutting diamet...

Copy end mill with double negative geometry which utilises 2 off ZP 16.. single-sided inserts, cutting diameter 16mm with 16mm parallel shank accor...

Copy end mill with double negative geometry which utilises 2 off ZP 12.. single-sided inserts, cutting diameter 12mm with 12mm parallel shank accor...

Copy end mill with double negative geometry which utilises 2 off ZP 10.. single-sided inserts, cutting diameter 10mm with 10mm parallel shank accor...

Face mill with double negative geometry which utilises 8 off HNGX 0906AN.. or XNGX 0906AN.. double-sided inserts, cutting diameter 125 to maximum 1...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 40mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 35mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 30mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 25mm with 90° a...

Single-sided milling insert PDMX 0905, pentagonal for a maximum depth of cut of .0787", with " corner radius, an indexing accuracy according to ISO...

Single-sided milling insert PDKT 0905 with chip-breakers, pentagonal for a maximum depth of cut of .0787", with .1181" corner radius, an indexing a...

Double-sided milling insert LNGX 1205, rectangular for a maximum depth of cut of .3543", with .0787" corner radius, an indexing accuracy according ...

High feed cutter with positve/negative geometry which utilises 8 off PD.X 0905ZE.., PDKT 0905.. or PDMW 0905.. single-sided inserts, cutting diamet...