Slot Milling

Disc mill with double positive geometry which utilises 16 off SNHQ 1102.. double-sided inserts, cutting diameter 6.000'' with 90° approach angle an...

Disc mill with double positive geometry which utilises 16 off SNHQ 1102.. double-sided inserts, cutting diameter 6.000'' with 90° approach angle an...

Disc mill with double positive geometry which utilises 12 off SNHQ 1102.. double-sided inserts, cutting diameter 5.000'' with 90° approach angle an...

Disc mill with double negative geometry which utilises 5 off SNHQ 1102.. double-sided inserts, cutting diameter 4.000'' with 90° approach angle and...

Disc mill with double positive geometry which utilises 10 off SNHQ 1102.. double-sided inserts, cutting diameter 4.000'' with 90° approach angle an...

Disc mill with double negative geometry which utilises 4 off SNHQ 1102.. double-sided inserts, cutting diameter 3.000'' with 90° approach angle and...

Disc mill with double negative geometry which utilises 4 off SNHQ 1102.. double-sided inserts, cutting diameter 3.000'' with 90° approach angle and...

Disc mill with double positive geometry which utilises 8 off SNHQ 1102.. double-sided inserts, cutting diameter 3.000'' with 90° approach angle and...

Disc mill with double positive geometry which utilises 8 off SNHQ 1102.. double-sided inserts, cutting diameter 3.000'' with 90° approach angle and...

Disc mill with double positive geometry which utilises 6 off SNHQ 1102.. double-sided inserts, cutting diameter 2.500'' with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 18 off SNHQ 1207.. double-sided inserts, cutting diameter 200mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 18 off SNHQ 1207.. double-sided inserts, cutting diameter 200mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 18 off SNHQ 1205.. double-sided inserts, cutting diameter 200mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 18 off SNHQ 1204.. double-sided inserts, cutting diameter 200mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 18 off SNHQ 1203.. double-sided inserts, cutting diameter 200mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 12 off SNHQ 1207.. double-sided inserts, cutting diameter 125mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 10 off SNHQ 1207.. double-sided inserts, cutting diameter 100mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1204.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 15 off SNHQ 1207.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 16 off SNHQ 1207.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 16 off SNHQ 1205.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 16 off SNHQ 1204.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 16 off SNHQ 1203.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 12 off SNHQ 1205.. double-sided inserts, cutting diameter 125mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 12 off SNHQ 1204.. double-sided inserts, cutting diameter 125mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 12 off SNHQ 1203.. double-sided inserts, cutting diameter 125mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 10 off SNHQ 1205.. double-sided inserts, cutting diameter 100mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 10 off SNHQ 1204.. double-sided inserts, cutting diameter 100mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 10 off SNHQ 1203.. double-sided inserts, cutting diameter 100mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1203.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 16 off SNHQ 1205.. double-sided inserts, cutting diameter 160mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 12 off SNHQ 1203.. double-sided inserts, cutting diameter 125mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 10 off SNHQ 1203.. double-sided inserts, cutting diameter 100mm with 90° approach angle and...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1203.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1103.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 6 off SNHQ 1203.. double-sided inserts, cutting diameter 63mm with 90° approach angle and 1...

Disc mill with positve/negative geometry which utilises 6 off SNHQ 1103.. double-sided inserts, cutting diameter 63mm with 90° approach angle and 1...

Disc mill with positve/negative geometry which utilises 6 off SNHQ 1102.. double-sided inserts, cutting diameter 63mm with 90° approach angle and 1...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1102.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

Disc mill with positve/negative geometry which utilises 8 off SNHQ 1103.. double-sided inserts, cutting diameter 80mm with 90° approach angle and 2...

T-slot mill which utilises 4 off CCMX 09T308 single-sided inserts, cutting diameter 40mm with 90° approach angle and 32mm Weldon shank according to...

T-slot mill which utilises 2 off CCMX 08T308 single-sided inserts, cutting diameter 32mm with 90° approach angle and 32mm Weldon shank according to...

T-slot mill which utilises 2 off CCMX 060304 single-sided inserts, cutting diameter 25mm with 90° approach angle and 25mm Weldon shank according to...