SOD05 - BODIES

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 32.6mm ...

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 24.7mm ...

Copy face mill with positve/negative geometry which utilises 8 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 117.6mm...

Copy face mill with positve/negative geometry which utilises 7 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 92.6mm ...

Copy face mill with positve/negative geometry which utilises 8 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 72.6mm ...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 72.6mm ...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 55.6mm ...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 55.6mm ...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 42.6mm ...

Copy face mill with positve/negative geometry which utilises 4 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 42.6mm ...

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 32.7mm ...

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 1.209 t...

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter .961'' ...

Copy face mill with positve/negative geometry which utilises 8 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 4.709 t...

Copy face mill with positve/negative geometry which utilises 7 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 3.709 t...

Copy face mill with positve/negative geometry which utilises 8 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.709 t...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.709 t...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.209 t...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 2.209 t...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 1.709 t...

Copy face mill with positve/negative geometry which utilises 4 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 1.709 t...