STN16 - 0.394" Max DOC

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 100mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 8 of TNGX 1606.. double-sided inserts, cutting diameter 100mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 1.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 1.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 1.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 115mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 7 of TNGX 1606.. double-sided inserts, cutting diameter 125mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 9 of TNGX 1606.. double-sided inserts, cutting diameter 125mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 1.250" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 1.250" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 1.250" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 1.250" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 1.250" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 1.250" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 8 of TNGX 1606.. double-sided inserts, cutting diameter 140mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 1.500" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 1.500" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 1.500" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 1.500" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 10 of TNGX 1606.. double-sided inserts, cutting diameter 160mm with 90° approach an...

Shoulder face mill with double negative geometry which utilises 10 of TNGX 1606.. double-sided inserts, cutting diameter 175mm with 90° approach an...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 2.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 5 of TNGX 1606.. double-sided inserts, cutting diameter 2" with 90° approach angle ...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 2.500" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 3.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 25mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 25mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 25mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 25mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 5 of TNGX 1606.. double-sided inserts, cutting diameter 3.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 7 of TNGX 1606.. double-sided inserts, cutting diameter 3.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 4.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 8 of TNGX 1606.. double-sided inserts, cutting diameter 4.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 40mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 40mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 40mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 40mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 40mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 9 of TNGX 1606.. double-sided inserts, cutting diameter 5.000" with 90° approach an...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 50mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 5 of TNGX 1606.. double-sided inserts, cutting diameter 50mm with 90° approach angl...