Turning

Screw clamp grooving bar for holding a double ended insert with 0.85-3.20mm cutting width (designation X61 0602.. ), left handed with insert perpen...

Screw clamp grooving bar for holding a single ended insert with 0.85-2.20mm cutting width (designation X61 0602..-1 ), left handed with insert perp...

Screw clamp grooving bar for holding a double ended insert with 0.85-3.20mm cutting width (designation X61 0602.. ), left handed with insert perpen...

Screw clamp grooving bar for holding a single ended insert with 0.85-2.20mm cutting width (designation X61 0602..-1 ), left handed with insert perp...

Screw clamp grooving tool for holding a double ended insert with 0.85-3.20mm cutting width (designation X61 0602.. ), right handed with insert para...

Screw clamp grooving tool for holding a double ended insert with 0.85-3.20mm cutting width (designation X61 0602.. ), right handed with insert para...

Screw clamp grooving tool for holding a double ended insert with 0.85-3.20mm cutting width (designation X61 0602.. ), right handed with insert para...

Screw clamp grooving tool for holding a double ended insert with 0.85-3.20mm cutting width (designation X61 0602.. ), left handed with insert paral...

Screw clamp grooving tool for holding a double ended insert with 0.85-3.20mm cutting width (designation X61 0602.. ), left handed with insert paral...

Screw clamp grooving tool for holding a double ended insert with 0.85-3.20mm cutting width (designation X61 0602.. ), left handed with insert paral...

Double ended circlip grooving insert, with a 1.55mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.55mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended o-ring grooving insert, with a 3.09mm cutting width and 1.5mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting e...

Double ended o-ring grooving insert, with a 3.09mm cutting width and 1.5mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting e...

Double ended o-ring grooving insert, with a 3.09mm cutting width and 1.5mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting e...

Double ended o-ring grooving insert, with a 3.09mm cutting width and 1.5mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting e...

Single ended o-ring grooving insert, with a 2.09mm cutting width and 1mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting edg...

Double ended o-ring grooving insert, with a 2.09mm cutting width and 1mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting edg...

Double ended o-ring grooving insert, with a 2.09mm cutting width and 1mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting edg...

Single ended o-ring grooving insert, with a 2.09mm cutting width and 1mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting edg...

Double ended o-ring grooving insert, with a 2.09mm cutting width and 1mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting edg...

Double ended o-ring grooving insert, with a 2.09mm cutting width and 1mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting edg...

Single ended o-ring grooving insert, with a 1.09mm cutting width and 0.5mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting e...

Single ended o-ring grooving insert, with a 1.09mm cutting width and 0.5mm full radius, a cutting width tolerance of ± 0.03mm and rounded cutting e...

Double ended circlip grooving insert, with a 3.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 3.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 3.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 3.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 3.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 3.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 3.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 3.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 2.7mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.7mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.7mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.7mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.55mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 2.55mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 2.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Single ended circlip grooving insert, with a 2.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.2mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 2.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 2.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.9mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Single ended circlip grooving insert, with a 1.9mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...