Turning

Lever lock scarfing tool with 6° clearance for carrying a square insert with a main cutting edge length of 15.875mm (designation SNMX 15-R.. ), lef...

Lever lock scarfing tool with 6° clearance for carrying a square insert with a main cutting edge length of 15.875mm (designation SNMX 15-R.. ), rig...

Modular system tool holder for holding a right hand KTP-(CLS)ANR turning tool cartridge, shank size 50mm x 55mm, 210mm long for wheelset machining

Modular system tool holder for holding a left hand KTP-(CLS)ANL turning tool cartridge, shank size 50mm x 55mm, 210mm long for wheelset machining

Top clamp grooving tool for holding a 30mm long double or single ended insert with 8mm cutting width (designation LCM. 0830.. ), left handed with i...

Top clamp grooving tool for holding a 30mm long double or single ended insert with 8mm cutting width (designation LCM. 0830.. ), right handed with ...

Top clamp grooving tool for holding a 30mm long double or single ended insert with 8mm cutting width (designation LCM. 0830.. ), left handed with i...

Screw clamp thread turning bar with 2° helix angle for holding a triangle shaped insert with an inscribed circle diameter of 12.7mm (designation TN...

Screw clamp thread turning bar with 2° helix angle for holding a triangle shaped insert with an inscribed circle diameter of 12.7mm (designation TN...

Screw clamp thread turning bar with 2° helix angle for holding a triangle shaped insert with an inscribed circle diameter of 9.525mm (designation T...

Top clamp grooving tool for holding a 30mm long double or single ended insert with 8mm cutting width (designation LCM. 0830.. ), right handed with ...

Screw clamp thread turning bar with 2° helix angle for holding a triangle shaped insert with an inscribed circle diameter of 9.525mm (designation T...

Modular system tool holder for holding a right hand KTP-(CLS)ANR and left hand KTP-(CLS)FNL turning tool cartridge, shank size 50mm x 55mm, 210mm l...

Modular system tool holder for holding a left hand KTP-(CLS)ANL and right hand KTP-(CLS)FNR turning tool cartridge, shank size 50mm x 55mm, 210mm l...

Side lock scarfing tool with 6° clearance for carrying a 60mm long rectangle blade with a main cutting edge length of 13.05mm (designation LDGN 130...

Lever lock scarfing tool with 20° clearance for carrying a square insert with a main cutting edge length of 19.05mm (designation SNMX 19-R.. ), lef...

Lever lock scarfing tool with 20° clearance for carrying a square insert with a main cutting edge length of 19.05mm (designation SNMX 19-R.. ), rig...

Lever lock scarfing tool with 20° clearance for carrying a square insert with a main cutting edge length of 15.875mm (designation SNMX 15-R.. ), le...

Lever lock scarfing tool with 20° clearance for carrying a square insert with a main cutting edge length of 15.875mm (designation SNMX 15-R.. ), ri...

Modular system tool holder for holding a left hand KHP/KHS turning tool cartridge, shank size 60mm x 80mm, 450mm long for heavy duty machining

Lever lock modular turning tool cartridge for holding a rectangular negative insert with a main edge length of 40mm (ISO designation LNUX 40…. ), a...

Screw clamp modular turning tool cartridge for holding a square positive insert with an inscribed circle diameter of 38.1mm, 9.52mm thick (ISO desi...

Screw clamp modular turning tool cartridge for holding a square positive insert with an inscribed circle diameter of 38.1mm, 9.52mm thick (ISO desi...

Lever lock modular turning tool cartridge for holding a rectangular negative insert with a main edge length of 40mm (ISO designation LNUX 40…. ), a...

Modular system tool holder for holding a right hand KHP/KHS turning tool cartridge, shank size 60mm x 80mm, 450mm long for heavy duty machining

Screw clamp modular turning tool cartridge for holding a square positive insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO desi...

Screw clamp modular turning tool cartridge for holding a square positive insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO desi...

Lever lock modular turning tool cartridge for holding a square negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO desig...

Lever lock modular turning tool cartridge for holding a square negative insert with an inscribed circle diameter of 25.4mm, 7.94mm thick (ISO desig...

Lever lock modular turning tool cartridge for holding a square negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO desig...

Lever lock modular turning tool cartridge for holding a square negative insert with an inscribed circle diameter of 25.4mm, 7.94mm thick (ISO desig...

Lever lock modular turning tool cartridge for holding a 80° rhombus negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO ...

Lever lock modular turning tool cartridge for holding a 80° rhombus negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO ...

Lever lock modular turning tool cartridge for holding a 80° rhombus negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO ...

Lever lock modular turning tool cartridge for holding a 80° rhombus negative insert with an inscribed circle diameter of 25.4mm, 9.52mm thick (ISO ...

Top clamp grooving bar for holding a 12.6mm long double or single ended insert with 4mm cutting width (designation LCM. 0413.. ), right handed with...

Top clamp grooving bar for holding a 12.6mm long double or single ended insert with 3mm cutting width (designation LCM. 0313.. ), left handed with ...

Top clamp grooving bar for holding a 12.6mm long double or single ended insert with 3mm cutting width (designation LCM. 0313.. ), right handed with...

Top clamp grooving bar for holding a 12.6mm long double or single ended insert with 3mm cutting width (designation LCM. 0313.. ), left handed with ...

Top clamp grooving bar for holding a 12.6mm long double or single ended insert with 3mm cutting width (designation LCM. 0313.. ), right handed with...

Top clamp grooving bar for holding a 12.6mm long double or single ended insert with 3mm cutting width (designation LCM. 0313.. ), left handed with ...

Top clamp grooving bar for holding a 12.6mm long double or single ended insert with 3mm cutting width (designation LCM. 0313.. ), right handed with...

Top clamp grooving tool for holding a 16.4mm long double or single ended insert with 6mm cutting width (designation LCM. 0616.. ), left handed with...

Top clamp grooving tool for holding a 16.4mm long double or single ended insert with 6mm cutting width (designation LCM. 0616.. ), right handed wit...

Top clamp grooving tool for holding a 16.4mm long double or single ended insert with 6mm cutting width (designation LCM. 0616.. ), left handed with...

Top clamp grooving tool for holding a 16.4mm long double or single ended insert with 6mm cutting width (designation LCM. 0616.. ), right handed wit...

Top clamp grooving tool for holding a 16.4mm long double or single ended insert with 5mm cutting width (designation LCM. 0516.. ), left handed with...

Top clamp grooving tool for holding a 16.4mm long double or single ended insert with 5mm cutting width (designation LCM. 0516.. ), right handed wit...