SOD05 - 45° Face Mill - Positive Design

Single-sided milling insert ODMT 0605 with chip-breakers, octagonal for a maximum depth of cut of .122", with " corner radius, an indexing accuracy...

Single-sided milling insert RDMT 12T3 with chip-breakers, round for a maximum depth of cut of .1181", with " corner radius, an indexing accuracy ac...

Single-sided milling insert RDMT 1003 with chip-breakers, round for a maximum depth of cut of .0984", with " corner radius, an indexing accuracy ac...

Single-sided milling insert RDMT 1003 with chip-breakers, round for a maximum depth of cut of .0984", with " corner radius, an indexing accuracy ac...

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 32.6mm ...

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 24.7mm ...

Copy face mill with positve/negative geometry which utilises 8 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 117.6mm...

Copy face mill with positve/negative geometry which utilises 7 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 92.6mm ...

Copy face mill with positve/negative geometry which utilises 8 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 72.6mm ...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 72.6mm ...

Copy face mill with positve/negative geometry which utilises 6 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 55.6mm ...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 55.6mm ...

Copy face mill with positve/negative geometry which utilises 5 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 42.6mm ...

Copy face mill with positve/negative geometry which utilises 4 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 42.6mm ...

Copy face mill with positve/negative geometry which utilises 3 off OD.T 05IM, RD.T 12IM or SD.T 12IM single-sided inserts, cutting diameter 32.7mm ...

Single-sided milling insert ODMT 0605 with chip-breakers, octagonal for a maximum depth of cut of .122", with " corner radius, an indexing accuracy...

Single-sided milling insert ODMT 0605 with chip-breakers, octagonal for a maximum depth of cut of .122", with " corner radius, an indexing accuracy...

Single-sided milling insert ODMT 0605 with chip-breakers, octagonal for a maximum depth of cut of .122", with " corner radius, an indexing accuracy...

Single-sided milling insert SDKT 1205 with chip-breakers, square for a maximum depth of cut of .3937", with .0315" corner radius, an indexing accur...

Single-sided milling insert SDKT 1205 with chip-breakers, square for a maximum depth of cut of .3937", with " corner radius, an indexing accuracy a...

Single-sided milling insert SDKT 1205 with chip-breakers, square for a maximum depth of cut of .3937", with .0315" corner radius, an indexing accur...

Single-sided milling insert SDKT 1205 with chip-breakers, square for a maximum depth of cut of .3937", with .0315" corner radius, an indexing accur...

Single-sided milling insert SDKT 1205 with chip-breakers, square for a maximum depth of cut of .3937", with " corner radius, an indexing accuracy a...

Single-sided milling insert RDMT 1205 with chip-breakers, round for a maximum depth of cut of .2362", with " corner radius, an indexing accuracy ac...

Single-sided milling insert RDMT 1205 with chip-breakers, round for a maximum depth of cut of .2362", with " corner radius, an indexing accuracy ac...

Single-sided milling insert ODMT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1181", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODMT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1181", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODMT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1181", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODMT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1181", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODMT 0504 with chip-breakers, octagonal for a maximum depth of cut of .0984", with " corner radius, an indexing accurac...

Single-sided milling insert ODKT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1063", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODKT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1063", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODKT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1063", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODKT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1063", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODKT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1063", with .0315" corner radius, an indexing ac...

Single-sided milling insert ODKT 0505 with chip-breakers, octagonal for a maximum depth of cut of .1063", with .0315" corner radius, an indexing ac...