Indexable Milling

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 40mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 2 of TNGX 1606.. double-sided inserts, cutting diameter 32mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 10 of TNGX 1606.. double-sided inserts, cutting diameter 175mm with 90° approach an...

Shoulder face mill with double negative geometry which utilises 10 of TNGX 1606.. double-sided inserts, cutting diameter 160mm with 90° approach an...

Shoulder face mill with double negative geometry which utilises 8 of TNGX 1606.. double-sided inserts, cutting diameter 140mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 9 of TNGX 1606.. double-sided inserts, cutting diameter 125mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 7 of TNGX 1606.. double-sided inserts, cutting diameter 125mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 115mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 8 of TNGX 1606.. double-sided inserts, cutting diameter 100mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 100mm with 90° approach ang...

Shoulder face mill with double negative geometry which utilises 7 of TNGX 1606.. double-sided inserts, cutting diameter 80mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 5 of TNGX 1606.. double-sided inserts, cutting diameter 80mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 6 of TNGX 1606.. double-sided inserts, cutting diameter 63mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 63mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 5 of TNGX 1606.. double-sided inserts, cutting diameter 50mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 50mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 4 of TNGX 1606.. double-sided inserts, cutting diameter 40mm with 90° approach angl...

Shoulder face mill with double negative geometry which utilises 3 of TNGX 1606.. double-sided inserts, cutting diameter 40mm with 90° approach angl...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 14mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 14mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 14mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 12mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 10mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 10mm with 90° a...

Shoulder mill with double negative geometry which utilises 8 off LNMU 1607.. or LNGU 1607.. double-sided inserts, cutting diameter 175mm with 90° a...

Shoulder mill with double negative geometry which utilises 8 off LNMU 1607.. or LNGU 1607.. double-sided inserts, cutting diameter 160mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 14mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 12mm with 90° a...

Shoulder mill with double negative geometry which utilises 3 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 32mm with 90° ap...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 14mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 8 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 6 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 25mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 5 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 40mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 1606.. or ADEX 1606.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 32mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 20mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 16mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 25mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 4 off ADMX 11T3.. or ADEX 11T3.. single-sided inserts, cutting diameter 40mm with 90° a...