Turning

Double ended circlip grooving insert, with a 1.9mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Single ended circlip grooving insert, with a 1.9mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 1.9mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Double ended circlip grooving insert, with a 1.9mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grade...

Single ended circlip grooving insert, with a 1.65mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.65mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.65mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 1.65mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.65mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.65mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.55mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.55mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 1.35mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.35mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.35mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 1.35mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.35mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.35mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.15mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 1.05mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.95mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Double ended circlip grooving insert, with a 0.85mm cutting width, a cutting width tolerance of ± 0.03mm and rounded cutting edges with facet, grad...

Single-sided negative turning insert, rectangular with a main edge length of 31.75mm, 4.76 mm nose radius, indexing accuracy according to ISO-toler...

Single-sided positive turning insert, 35° rhomboid with 7° clearance, inscribed circle diameter of 9.525mm, 4.76mm thick, 0.2mm nose radius, indexi...

Single-sided positive turning insert, 35° rhomboid with 7° clearance, inscribed circle diameter of 6.35mm, 3.18mm thick, 0.4mm nose radius, indexin...

Single-sided positive turning insert, 35° rhomboid with 7° clearance, inscribed circle diameter of 6.35mm, 3.18mm thick, 0.2mm nose radius, indexin...

Single-sided positive turning insert, 35° rhomboid with 7° clearance, inscribed circle diameter of 6.35mm, 3.18mm thick, 0.1mm nose radius, indexin...

Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525mm, 3.97mm thick, 1.2mm nose radius, indexing...

Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525mm, 3.97mm thick, 0.1mm nose radius, indexi...