Turning

Insert for hard turning with 2 CBN tipped corners on one-side, 80° rhomboid with 7° clearance, inscribed circle diameter of 1/4", 3/32" thick, 1/64...

Double-sided scarfing insert, square with a main cutting edge length of 19.05mm, 8.15mm thick and a working radius of 45mm for tube diameters from ...

Single-sided threading insert, triangular with an inscribed circle diameter of .500", for right and left hand cutting partial profile of ISO-metric...

Single-sided threading insert, triangular with an inscribed circle diameter of .500", for right and left hand cutting partial profile of ISO-metric...

Single-sided threading insert, triangular with an inscribed circle diameter of .500", for right and left hand cutting partial profile of ISO-metric...

Single-sided threading insert, triangular with an inscribed circle diameter of .500", for right and left hand cutting partial profile of ISO-metric...

Double ended parting and grooving insert, 16.4mm long with a 4mm cutting width and 0.2mm corner radii, 6° front angle to reduce pip and burr on the...

Double ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.2mm corner radii, 6° front angle to reduce pip and burr on the...

Double ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.2mm corner radii, 15° front angle to reduce pip and burr on th...

Double ended parting and grooving insert, 16.4mm long with a 3mm cutting width and 0.2mm corner radii, 6° front angle to reduce pip and burr on the...

Double ended parting and grooving insert, 30mm long with a 8mm cutting width and 4mm full radius, an accuracy according to tolerance class-M and ch...

Double ended parting and grooving insert, 30mm long with a 8mm cutting width and 0.8mm corner radii, an accuracy according to tolerance class-M and...

Single ended parting and grooving insert, with a 1.6mm cutting width and 0.16mm corner radii, an accuracy according to tolerance class-M and chip-b...

Single ended parting and grooving insert, with a 1.5mm cutting width and 0.16mm corner radii, an accuracy according to tolerance class-M and chip-b...

Special design positive turning insert, round with 7° clearance, a diameter of 32mm, 9.52mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 32mm, 9.52mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 32mm, 9.52mm thick, indexing accuracy according to ISO-tolerance cla...

Single-sided positive turning insert, round with 7° clearance, a diameter of 30 mm, 9.52mm thick, indexing accuracy according to ISO-tolerance clas...

Special design positive turning insert, round with 7° clearance, a diameter of 25mm, 7.94mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 25mm, 7.94mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 25mm, 7.94mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 20mm, 6.35mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 20mm, 6.35mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 20mm, 6.35mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 20mm, 6.35mm thick, indexing accuracy according to ISO-tolerance cla...

Special design positive turning insert, round with 7° clearance, a diameter of 20mm, 6.35mm thick, indexing accuracy according to ISO-tolerance cla...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric internal threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric internal threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of UN internal threads with 20...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric internal threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of UN internal threads with 18...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of UN internal threads with 16...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric internal threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of BSW internal threads with 1...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of UN internal threads with 14...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of UN internal threads with 12...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of BSW internal threads with 1...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric internal threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric external threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric external threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of UN external threads with 20...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric external threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of BSW external threads with 1...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of UN external threads with 18...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric external threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of UN external threads with 16...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of ISO-metric external threads...

Pressed single-sided threading insert, triangular with an inscribed circle diameter of .375", for right hand cutting of BSW external threads with 1...