Milling

Single-sided milling insert RDHX 1003, round for a maximum depth of cut of .0984", with " corner radius, an indexing accuracy according to ISO-tole...

Single-sided milling insert RDHX 0702, round for a maximum depth of cut of .0787", with " corner radius, an indexing accuracy according to ISO-tole...

Single-sided milling insert RDHX 12T3, round for a maximum depth of cut of .1181", with " corner radius, an indexing accuracy according to ISO-tole...

Copy face mill with double negative geometry which utilises 6 off WNHX 0403.. double-sided inserts, cutting diameter 35mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 6 off WNHX 0403.. double-sided inserts, cutting diameter 32mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 4 off WNHX 0403.. double-sided inserts, cutting diameter 25mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 3 off WNHX 0403.. double-sided inserts, cutting diameter 20mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 6 off WNHX 0403.. double-sided inserts, cutting diameter 32mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 4 off WNHX 0403.. double-sided inserts, cutting diameter 25mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 3 off WNHX 0403.. double-sided inserts, cutting diameter 20mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 5 off CNHX 0502.. double-sided inserts, cutting diameter 20mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 3 off CNHX 0502.. double-sided inserts, cutting diameter 16mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 2 off CNHX 0502.. double-sided inserts, cutting diameter 12mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 5 off CNHX 0502.. double-sided inserts, cutting diameter 20mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 3 off CNHX 0502.. double-sided inserts, cutting diameter 16mm with 93° approach angle a...

Copy face mill with double negative geometry which utilises 2 off CNHX 0502.. double-sided inserts, cutting diameter 12mm with 93° approach angle a...

Single-sided milling insert RCMT 2006 with chip-breakers, round for a maximum depth of cut of .3937", with " corner radius, an indexing accuracy ac...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 14mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 14mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 14mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 3 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 12mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 10mm with 90° a...

Shoulder mill with positve/negative geometry which utilises 2 off ADMX 0702.. or ADEX 0702.. single-sided inserts, cutting diameter 10mm with 90° a...

Double-sided milling insert XNGX 1308, special shape and wiper design for a maximum depth of cut of .1378", with " corner radius, an indexing accur...

Single-sided milling insert RDGT 12T3 with chip-breakers, round for a maximum depth of cut of .1181", with " corner radius, an indexing accuracy ac...

Single-sided milling insert RDGT 1003 with chip-breakers, round for a maximum depth of cut of .0984", with " corner radius, an indexing accuracy ac...

Double-sided milling insert HNGX 0906, hectagonal for a maximum depth of cut of .1969", with " corner radius, an indexing accuracy according to ISO...

Double-sided milling insert HNGX 0604, hectagonal for a maximum depth of cut of .1181", with " corner radius, an indexing accuracy according to ISO...

Double-sided milling insert HNGX 0604, hectagonal for a maximum depth of cut of .1181", with " corner radius, an indexing accuracy according to ISO...

Rotary burr set in plastic SetPack container, consisting of 8 carbide burrs with FM single cut flute style with wide speced edges for wrought, cast...

Rotary burr set in plastic SetPack container, consisting of 8 carbide burrs with DC double cut flute style with close spaced edges for steel and ca...

Rotary burr set in plastic SetPack container, consisting of 12 carbide burrs with DC double cut flute style with close spaced edges for steel and c...

Rotary burr set in plastic SetPack container, consisting of 12 carbide burrs with DC double cut flute style with close spaced edges for steel and c...

Piloted die mill, diameter 1/4" with 1.1/4" length of cut, 3" overall length and 1/4" shank, solid carbide with bright finish, DC double cut flute ...

Piloted die mill, diameter 3/16" with 2" length of cut, 3" overall length and 3/16" shank, solid carbide with bright finish, DC double cut flute st...

Piloted die mill, diameter 1/8" with 1" length of cut, 3" overall length and 1/8" shank, solid carbide with bright finish, DC double cut flute styl...

Router with 135° drill point, diameter 1/4" with 1.1/2" length of cut, 3" overall length and 1/4" shank, solid carbide with bright finish, GRP diam...

Router with 135° drill point, diameter 1/4" with 1" length of cut, 3" overall length and 1/4" shank, solid carbide with bright finish, GRP diamond ...

Router with end mill type end cut, diameter 1/4" with 1" length of cut, 3" overall length and 1/4" shank, solid carbide with bright finish, GRP dia...

Router with end mill type end cut, diameter 1/4" with 1" length of cut, 2.1/2" overall length and 1/4" shank, solid carbide with bright finish, GRP...

Router with end mill type end cut, diameter 1/8" with 1/2" length of cut, 1.1/2" overall length and 1/8" shank, solid carbide with bright finish, G...

Router with burr type end cut, diameter 1/2" with 1" length of cut, 3" overall length and 1/2" shank, solid carbide with bright finish, GRP diamond...

Router without end cut, diameter 3/8" with 1" length of cut, 2.1/2" overall length and 3/8" shank, solid carbide with bright finish, GRP diamond cu...

Router without end cut, diameter 1/4" with 1" length of cut, 3" overall length and 1/4" shank, solid carbide with bright finish, GRP diamond cut fl...

Inverted cone burr (N shape), diameter 5/8" with 3/4" length of cut, 2.1/2" overall length and 1/4" shank, carbide tipped with toughened and harden...

Inverted cone burr (N shape), diameter 1/2" with 1/2" length of cut, 2.1/4" overall length and 1/4" shank, carbide tipped with toughened and harden...

Inverted cone burr (N shape), diameter 3/8" with 3/8" length of cut, 2.1/8" overall length and 1/4" shank, carbide tipped with toughened and harden...