Milling

Single-sided milling insert SPKN 1203 with a plane rake surface, square for right hand cutting with a maximum depth of cut of .3543", with " corner...

Double-sided disc milling insert, for a cutting width of .4724" with cutting edges with facet, M8340 PVD coated fine grained WC-Co carbide within I...

Double-sided disc milling insert, for a cutting width of .4724" with rounded cutting edges, M8340 PVD coated fine grained WC-Co carbide within ISO-...

Single-sided disc milling insert, for a cutting width of .4724" with .0394" corner radius and cutting edges with facet, M8340 PVD coated fine grain...

Single-sided disc milling insert, for a cutting width of .4724" with .0197" corner radius and cutting edges with facet, M8340 PVD coated fine grain...

Double-sided disc milling insert, for a cutting width of .3937" with cutting edges with facet, M8340 PVD coated fine grained WC-Co carbide within I...

Double-sided disc milling insert, for a cutting width of .3937" with rounded cutting edges, M8340 PVD coated fine grained WC-Co carbide within ISO-...

Single-sided disc milling insert, for a cutting width of .3937" with .0591" corner radius and cutting edges with facet, M8340 PVD coated fine grain...

Shoulder mill with double negative geometry which utilises 3 off LNGX 1205.. or LNGU 1205.. double-sided inserts, cutting diameter 32mm with 90° ap...

Double-sided milling insert SNGX 1305, square for a maximum depth of cut of .4724", with .0472" corner radius, an indexing accuracy according to IS...

Double-sided milling insert SNGX 1305, square for a maximum depth of cut of .4724", with .0472" corner radius, an indexing accuracy according to IS...

Single-sided milling insert TBMR 2707 with chip-breakers, triangular for a maximum depth of cut of .7087", with " corner radius, an indexing accura...

Single-sided milling insert TBMR 2707 with chip-breakers, triangular for a maximum depth of cut of .7087", with " corner radius, an indexing accura...

Single-sided milling insert SPUN 2506 with a plane rake surface, square for a maximum depth of cut of .7087", with .0787" corner radius, an indexin...

Single-sided milling insert SPUN 2506 with a plane rake surface, square for a maximum depth of cut of .7087", with .0787" corner radius, an indexin...

Single-sided milling insert SPUN 2506 with a plane rake surface, square for a maximum depth of cut of .7087", with .063" corner radius, an indexing...

Single-sided milling insert SPGN 2506 with a plane rake surface, square for a maximum depth of cut of .7087", with " corner radius, an indexing acc...

Single-sided milling insert SPGN 2506 with a plane rake surface, square for a maximum depth of cut of .7087", with " corner radius, an indexing acc...

Single-sided milling insert SBMR 2207 with chip-breakers, square for a maximum depth of cut of .5906", with " corner radius, an indexing accuracy a...

Single-sided milling insert SBMR 2207 with chip-breakers, square for a maximum depth of cut of .5906", with " corner radius, an indexing accuracy a...

Single-sided milling insert SBMR 2207 with chip-breakers, square for a maximum depth of cut of .5906", with " corner radius, an indexing accuracy a...

Single-sided milling insert SBMR 2207 with chip-breakers, square for a maximum depth of cut of .5906", with " corner radius, an indexing accuracy a...

Single-sided milling insert SBKX 2207, square for a maximum depth of cut of .5906", with " corner radius, an indexing accuracy according to ISO-tol...

Single-sided milling insert LNET 1606 with chip-breakers, rectangular for a maximum depth of cut of .5906", with .063" corner radius, an indexing a...

Single-sided milling insert SPUN 2506 with a plane rake surface, square for a maximum depth of cut of .7087", with .0787" corner radius, an indexin...

Single-sided milling insert RDMX 1604, round for a maximum depth of cut of .1575", with " corner radius, an indexing accuracy according to ISO-tole...

Single-sided milling insert RDMX 12T3, round for a maximum depth of cut of .1181", with " corner radius, an indexing accuracy according to ISO-tole...

Single-sided milling insert RDMX 1003, round for a maximum depth of cut of .0984", with " corner radius, an indexing accuracy according to ISO-tole...

Single-sided milling insert RDMX 1003, round for a maximum depth of cut of .0984", with " corner radius, an indexing accuracy according to ISO-tole...

Single-sided milling insert RDMX 12T3, round for a maximum depth of cut of .1181", with " corner radius, an indexing accuracy according to ISO-tole...

Single-sided milling insert RDMX 1003, round for a maximum depth of cut of .0984", with " corner radius, an indexing accuracy according to ISO-tole...

Single-sided milling insert SPGN 0903 with a plane rake surface, square for a maximum depth of cut of .2362", with .0315" corner radius, an indexin...

Single-sided milling insert SPET 1204 with chip-breakers, square for a maximum depth of cut of .4724", with " corner radius, an indexing accuracy a...

Single-sided milling insert SPET 1204 with chip-breakers, square for a maximum depth of cut of .4724", with " corner radius, an indexing accuracy a...

Single-sided milling insert SPET 1204 with chip-breakers, square for a maximum depth of cut of .4724", with .0315" corner radius, an indexing accur...

Single-sided milling insert SOMT 09T3 with chip-breakers, square for a maximum depth of cut of .315", with .0315" corner radius, an indexing accura...

Single-sided milling insert SOMT 09T3 with chip-breakers, square for a maximum depth of cut of .315", with .0157" corner radius, an indexing accura...

Single-sided milling insert SOMT 09T3 with chip-breakers, square for a maximum depth of cut of .315", with .0157" corner radius, an indexing accura...

Single-sided milling insert SNMT 1205 with chip-breakers, square for a maximum depth of cut of .2559", with " corner radius, an indexing accuracy a...

Single-sided milling insert SNMT 1205 with chip-breakers, square for a maximum depth of cut of .2559", with " corner radius, an indexing accuracy a...

Single-sided milling insert SNKT 1205 with chip-breakers, square for a maximum depth of cut of .2559", with " corner radius, an indexing accuracy a...

Single-sided disc milling insert, for a cutting width of .3937" with .0197" corner radius and cutting edges with facet, M8340 PVD coated fine grain...

Double-sided disc milling insert, for a cutting width of .315" with cutting edges with facet, M8340 PVD coated fine grained WC-Co carbide within IS...

Double-sided disc milling insert, for a cutting width of .315" with rounded cutting edges, M8340 PVD coated fine grained WC-Co carbide within ISO-g...

Single-sided disc milling insert, for a cutting width of .315" with .0591" corner radius and cutting edges with facet, M8340 PVD coated fine graine...

Single-sided disc milling insert, for a cutting width of .315" with .0197" corner radius and cutting edges with facet, M8340 PVD coated fine graine...

Double-sided disc milling insert, for a cutting width of .2362" with cutting edges with facet, M8340 PVD coated fine grained WC-Co carbide within I...

Double-sided disc milling insert, for a cutting width of .2362" with rounded cutting edges, M8340 PVD coated fine grained WC-Co carbide within ISO-...